iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
They look good! The spring works to hold it open too.
Nice Job on the latch!
Here was my solution.I found this latch on Amazon and only had to do some minor filing to the hole for it to operate smoothly. I also had to drill two holes to hold the latch assembly. I use #8 machine screws with cap nuts to secure.
__________________
1995 Winnebago Warrior 23RC Class A
__________________
Finally Retired-60% Time in Motorhome
2000 Dynasty Regent, 8.3, Banks Turbo, McCabe Racing 5" Diameter Exhaust, 475 HP 1425 Torque 11+MPG towing 05 Pilot 700W solar & E-Bikes