Battery Cut Out Switch

[Joels]

I had to jump out the cellanoid from my battery cut out switch near my door of my 2007 monaco dip had new cellanoid put in and not compatable...connected wires and eliminated cellanoid but now I'm getting an audible clicking under my galley sink...any thoughts and where can I get a genuine monaco cellanoid.

[RickO]

Welcome to the forum! I'm sure some of our Monaco experts will be along to help with you problem soon.

Best of luck

Rick

[Barlow46]

Here is a thread that may help you decide what to do. http://www.irv2.com/forums/f115/remo...ity-95929.html
Don't know what could be causing the clicking under the sink. Open your bay below the sink and see if you can locate where exactly the noise is coming from.

[Joels]

click under sink can't be isolated yet but thanks for the input

[Robi.1014]

Welcome to the forum.

I've joked that we should all band together and create a class action suit .... and sue the manufacturer of the solenoid you are describing. The failure rate of that solenoid is off the chart!! I removed my solenoid (and therefore the "salesman kill switch") because I refuse to give the manufacturer (of the solenoid) any more money. Rant complete.

WRT clicking under the galley sink, I think the only device under there that uses 12VDC is the furnace (at least that's how my Dip is configured). Being a 12V system, this furnace is fused somewhere (not "circuit breakered", but "fused"). Suggest removing the fuse and see if the clicking stops.

The other possibility: you may be hearing a "water hammer" effect of your fresh water pump cycling on and off (for some reason). Again: turn this pump off and see if the clicking goes away.

[Joels]

Not pump already took that out of the equation but furnace is a possibility since I did hear noise like air rush through the vent.Noise has since stopped but will search for fuse on next occurence...thx