Bay wall construction 2001 Dynasty

[Jeff753]

Looking at putting in this tv mount. Does anyone know the physical construction of the front bay rear wall?
I figure I may put a 3/4 plywood board on that wall to mount the tv mount
Interior Slide-Out Mount - MORryde Products

[jacwjames]

The side wall on my bays are thin material, not sure what the construction is but no structural support there. There are vertical metal posts spaced out, you may be able to locate them and attach to that.

[K7JV]

Jim J described what we have on our '06 Dynasty, as well. I think it was the same on our '94 Dynasty. If you slide under it and look up, you can easily see what is up in there between the walls. I don't know if the spacing would be such that you could slide some durable wood up into the gap to screw into, or not. But it might be worth a try.

Monaco mounted TV's down there, so it can be done. But you might want to find one that was factory installed and see how they did it.

Hopefully someone on this forum will come to your rescue on that thought.

[barmcd]

The walls of my bays seem to be some type of insulation sandwiched between plastic sheet.

[Ivylog]

If your basement doors are like my 04 Dynasty you can only mount a small TV. Took me awhile to figure out how to have a 40”.
https://www.rv.net/forum/index.cfm/f...4.cfm#28612224

[Jeff753]

How did you mount it? Aftermarket mount?

[Ivylog]

Originally Posted by Jeff753

How did you mount it? Aftermarket mount?

If you mean this, I made it and it folds up with room to store stuff underneath.