|
|
12-29-2017, 06:22 PM
|
#1
|
Senior Member
Monaco Owners Club Holiday Rambler Owners Club
Join Date: Nov 2016
Location: The Villages, FL
Posts: 138
|
Bedroom Slide Wiper Seal
I need to replace my wiper seals on the driver bedroom slide. It has them on the inside and outside of the coach. The size of the seal is 1/8th inch thick x 2.25 inch wide. I have searched far and wide on this site and google but have not found this size seal. The closest I have found in size is 1/4 inch thick by 2.5 inches. Anyone else replaced theirs with a different size?
__________________
2008 Holiday Rambler Ambassador 40SKQ
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
12-29-2017, 06:32 PM
|
#2
|
Senior Member
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,486
|
try this web site and see if correct one is listed.
Uni-Grip
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
|
|
|
12-29-2017, 06:47 PM
|
#3
|
Senior Member
Monaco Owners Club Holiday Rambler Owners Club
Join Date: Nov 2016
Location: The Villages, FL
Posts: 138
|
Quote:
Originally Posted by windsorbill
try this web site and see if correct one is listed.
Uni-Grip
|
Thanks, that’s one of the sites I checked without luck, amazing how many types of seals are available.
__________________
2008 Holiday Rambler Ambassador 40SKQ
|
|
|
12-29-2017, 07:14 PM
|
#4
|
Member
Monaco Owners Club Ford Super Duty Owner
Join Date: Sep 2006
Location: Colorado
Posts: 76
|
Cleanseal.com is one I used 7 years ago...ZML 6705 worked on my full wall slide after going through 2 seals in three years when unit was new. Is encapsulated heavy rubber instead of sponge with an open metal grip. Still holding strong. Not sure what your seals look like, but this is just another resource.
(click on "profile" of what seal you need and it shows measurements of each profile available).
__________________
2007 Monaco Monarch 30SFS SVE with 2006 Ford V10 Chassis. 2001 Honda CRV Toad
|
|
|
12-29-2017, 07:33 PM
|
#5
|
Senior Member
Monaco Owners Club Holiday Rambler Owners Club
Join Date: Nov 2016
Location: The Villages, FL
Posts: 138
|
Quote:
Originally Posted by dickiebob
Cleanseal.com is one I used 7 years ago...ZML 6705 worked on my full wall slide after going through 2 seals in three years when unit was new. Is encapsulated heavy rubber instead of sponge with an open metal grip. Still holding strong. Not sure what your seals look like, but this is just another resource.
(click on "profile" of what seal you need and it shows measurements of each profile available).
|
Thanks, I tried them. I just need a flat wiper seal. I think that ZML6705 will work on another slide though.
__________________
2008 Holiday Rambler Ambassador 40SKQ
|
|
|
12-29-2017, 09:31 PM
|
#6
|
Senior Member
Join Date: May 2012
Posts: 2,947
|
Try Happycarz he found a supplier for his under slide blade seal.
__________________
Perry & Julie: 2008 Monaco Camelot 40PDQ, 400ISL, Toad; 2015 Chevy Equinox.
[SIGPIC][/SIGPIC]
|
|
|
12-30-2017, 12:33 AM
|
#7
|
Senior Member
Holiday Rambler Owners Club
Join Date: Feb 2017
Location: Oregon
Posts: 100
|
Try Steele Rubber products 800 230-5897 or steelerubber.com/rv
__________________
08 Holiday Rambler endeavor skq 400 Cummins
|
|
|
12-30-2017, 12:40 AM
|
#8
|
Senior Member
Monaco Owners Club
Join Date: Sep 2007
Location: Scottsdale, AZ
Posts: 2,321
|
How is the flat wiper seal mounted? Pictures would be great.
__________________
Harry
2008 Monaco Camelot 40' PDQ
|
|
|
12-30-2017, 07:05 AM
|
#9
|
Senior Member
Monaco Owners Club Vintage RV Owners Club Holiday Rambler Owners Club
Join Date: Jul 2012
Location: Lexington, SC
Posts: 2,822
|
__________________
Vera & Ken
1998 Holiday Rambler Imperial, RR8S Chassis
Cummins 6C8.3 mechanical engine, 325HP, 3060 Allison
Towing 2014 Ford Explorer
|
|
|
12-30-2017, 02:39 PM
|
#10
|
Senior Member
Monaco Owners Club Holiday Rambler Owners Club
Join Date: Nov 2016
Location: The Villages, FL
Posts: 138
|
Quote:
Originally Posted by Happycarz
How is the flat wiper seal mounted? Pictures would be great.
|
The seal wiper and is just a flat piece of rubber, 1/8th inch thick and 2.25 inches wide, it glues on, I imagine the seal comes with the glue ready to go with a peel off protector. The glue takes up about 1 inch of the 2.25 inch width. On my rig it is used inside and out on the driver bedroom slide and outside on the drive living room Slide...must 85 feet of this stuff between the two slide.
__________________
2008 Holiday Rambler Ambassador 40SKQ
|
|
|
12-30-2017, 02:41 PM
|
#11
|
Senior Member
Monaco Owners Club Holiday Rambler Owners Club
Join Date: Nov 2016
Location: The Villages, FL
Posts: 138
|
Quote:
Originally Posted by scott 61
Try Steele Rubber products 800 230-5897 or steelerubber.com/rv
|
I tried them, but will call as they may know of a source or order it for me.
__________________
2008 Holiday Rambler Ambassador 40SKQ
|
|
|
12-30-2017, 04:31 PM
|
#12
|
Senior Member
Join Date: Jan 2016
Posts: 2,186
|
I thought most Monacos used a seal that pushed over an aluminum strip
and was held on by grippers in the rubber .
That's the way mine is plus it has other stick on seals both inside and out .
This is what my seal looks like
Look at this page and see in one at least looks like yours .
Slide Out Seals
Ray D
03 Windsor
|
|
|
12-30-2017, 04:50 PM
|
#13
|
Senior Member
Monaco Owners Club Holiday Rambler Owners Club
Join Date: Nov 2016
Location: The Villages, FL
Posts: 138
|
Quote:
Originally Posted by RamiDav
I thought most Monacos used a seal that pushed over an aluminum strip
and was held on by grippers in the rubber .
That's the way mine is plus it has other stick on seals both inside and out .
This is what my seal looks like
Look at this page and see in one at least looks like yours .
Slide Out Seals
Ray D
03 Windsor
|
That’s correct for the curb side bedroom slide and I think the Kitchen Slide curbside also. For some reason not the other two slides and the ones with bad wiper seals.
__________________
2008 Holiday Rambler Ambassador 40SKQ
|
|
|
12-30-2017, 05:59 PM
|
#14
|
Senior Member
Monaco Owners Club
Join Date: Aug 2007
Location: Gardnerville, Nevada
Posts: 1,336
|
USCGMech: In 2016 Happycarz got me a part number for the seal and I called Monaco. Monaco informed me they stock the seal which is 2.25" wide but the part number has changed and is now #594464 and runs $2.75 a foot.
Give Monaco a call, hopefully they still stock the flat seal.
__________________
Ken, Chris and Maverick (Golden Retriever)
2009 Beaver Contessa
1984 LS1 CJ7 & 2017 Yamaha YXZ SS SE
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|