Hello all
Re: our 2006 Monaco, Camelot PAQ
I read through some prior posts regarding Monaco's Alladin/Camera problems, but found none that detailed cable routing, what to look for "under dash", or elsewhere, so as to check the integrity of circuits, etc.
As seemingly experienced by others, my rear camera works erratically.
I wondered whether it might have to do with the connection at the camera itself, so I removed it and found that the camera had a "short tail" which plugged into a cable running downward, inside the rear cap. I cleaned both ends of that connection; reconnected, and found this didn't resolve the problem; still have "flickering/disappearing" signal on monitor.
Has anyone gone through the whole circuitry from end to end?
If so, would you be so kind as to share your findings? i.e.
1) how/where is the cable routed?
2) what does the cable plug into (Alladin??) within the dashboard, what does this device physically look like, and where is it located? Any pictures?
I recently purchased a Garmin Dezl 760LMT Navigation Unit, which includes a video jack. Might this serve to display the existing camera's output? Has anyone done this already? Need cable adapter? etc.?
Your "step x step" suggestions would be appreciated.
Thanks
Rudy