Need help with some information on “ City Water Fill” ( position 1)
“ City Water Closed” ( position 2)
in the 1. fill position the fresh tank holding fills just fine
and once full I turn the valve to position 2.closed the water and the water pumps works fine from the holding tank until empty.
My issue is and took me a while to catch on to, but even when hooked to city water and valve in the # 2 pos with good water pressure and volume at the city connection hose, just after a few Days ( depends on water volume used ) I notice low water pressure / airation and the fresh water tank is empty again.
Also with the valve is in the ( position #2) and the fresh water tank is empty I have little to no water pressure ...with or without the water pump running.
So Im guessing maybe a stuck check valve? and wondering your opinions ?…and the location of this check valve ?...is it in the gate valve seen in the pics I posted?
Im currently on the road for a while and internet service is very limited so may be a bit before I respond back.
Thanks in advance