RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 02-21-2020, 03:49 PM   #15
Junior Member
 
Join Date: Aug 2018
Posts: 12
Quote:
Originally Posted by Swampjeep View Post
Hello, sorry to pull up this old post, but I just bought a 1992 Monaco Dynasty with the 8.3 Cummins. I do not see either of the over flow compartments on my RV. I have a Radiator fill that is on the side on the coach. It is actually totally sideways and hard to add coolant. Am I missing this reservior? or is my 36' different then yours?
Also do you have the rear controls? I have rear engine controls that look to be where this reservior is on yours, or right next to it. I can't read the mine. can anyone share a pic so I can see how the switches should be positioned?
thanks
In my 1992 36' Dynasty the coolant reservoir is mounted in the upper left side, and the rear control panel is in the upper right side. Attached is a picture of the control panel.
Attached Thumbnails
Click image for larger version

Name:	Rear engine control panel (002).jpg
Views:	13
Size:	183.3 KB
ID:	275785  
Duck Tape is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-07-2020, 08:16 PM   #16
Junior Member
 
Monaco Owners Club
Join Date: Jan 2020
Posts: 12
Quote:
Originally Posted by Duck Tape View Post
In my 1992 36' Dynasty the coolant reservoir is mounted in the upper left side, and the rear control panel is in the upper right side. Attached is a picture of the control panel.
interesting, same box, but mine is upper left of the engine opening

I am now in the middle of an engine rebuild but my engine tags are not filled out. I can't match up parts to purchase and Cummins will not help me out.

Can anyone here tell me where the ECM is located? and what is looks like? this is the last place I have any hope to fine the original Engine Serial number.
Or pics of where the engine serial number is stamped on the block? yes, the stamped numbers on the block, not the printed tag. as my tag is on the engine but blank where CPL is supposed to be.

thanks
Swampjeep is offline   Reply With Quote
Old 04-08-2020, 10:17 AM   #17
Junior Member
 
Join Date: Aug 2018
Posts: 12
Quote:
Originally Posted by Swampjeep View Post
interesting, same box, but mine is upper left of the engine opening

I am now in the middle of an engine rebuild but my engine tags are not filled out. I can't match up parts to purchase and Cummins will not help me out.

Can anyone here tell me where the ECM is located? and what is looks like? this is the last place I have any hope to fine the original Engine Serial number.
Or pics of where the engine serial number is stamped on the block? yes, the stamped numbers on the block, not the printed tag. as my tag is on the engine but blank where CPL is supposed to be.

thanks
I wish I knew more about these engines, others on here surely will, but it was my understanding that the Cummins 8.3 didn't get an ECM until 1995.

As for where to find a serial number, according to the Cummins Quickserve site, "If the engine dataplate is not readable, the engine serial number can be identified on the engine block on top of the lubricating oil cooler housing."

Good luck
Duck Tape is offline   Reply With Quote
Old 04-08-2020, 11:37 AM   #18
Junior Member
 
Monaco Owners Club
Join Date: Jan 2020
Posts: 12
Quote:
Originally Posted by Duck Tape View Post
I wish I knew more about these engines, others on here surely will, but it was my understanding that the Cummins 8.3 didn't get an ECM until 1995.

As for where to find a serial number, according to the Cummins Quickserve site, "If the engine dataplate is not readable, the engine serial number can be identified on the engine block on top of the lubricating oil cooler housing."

Good luck
Thanks, that was what I thought, no ECM.

And if I'm looking in the right place for the other option, well, I don't see anything here either. "If the engine dataplate is not readable, the engine serial number can be identified on the engine block on top of the lubricating oil cooler housing."

thanks
Swampjeep is offline   Reply With Quote
Reply

Tags
monaco, monaco dynasty



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Monaco Dynasty Barron III :: 1997 Monaco Dynasty Barron III ctmdr iRV2 Owners Registry 0 01-17-2018 10:52 AM
91 Dynasty Coolant Reservoir firstpusher Monaco Owner's Forum 8 10-07-2014 12:06 AM


All times are GMT -6. The time now is 01:40 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.