Community Forums

jmbci · 06-30-2014, 10:12 AM

1999 Monaco signature series cruise control will not engage, what are the possible problems?

Papa_Jim · 06-30-2014, 10:22 AM

Do you know the brand of the cruise control box? Is it a King cruise control mounted on the firewall in the engine bay?

Jim

macantic · 06-30-2014, 10:58 AM

Lots of possibilities,may just be a fuse or a simple brake pedal switch adjustment. Good Luck!

jmbci · 06-30-2014, 11:04 AM

I don't know what brand it is this is a new coach to me we have had it for two weeks. I will try to find the brand name I have a lot of books and manuals to read.

JMBCI

GiddyupgoTX · 06-30-2014, 02:56 PM

Just a possibility: your coach may be different than ours, but the Cruise will not engage if the Exhaust Brake is turned on. You could say that I "tested" that once!

I know what you mean about your reading requirements. We've had our coach a few months now, and I can't say I'm thoroughly briefed in on everything yet. But I do learn a little more every time out!

gemert · 06-30-2014, 05:08 PM

My cruise has a relay in the elec bay under the driver. Every time it quits working I tap on the relay and it works. Due to be worked on early next month.

terry735001 · 06-30-2014, 05:37 PM

dnot see this much but well add it

if one day the GVWR is well over and you have it set going up hill and it has to give it to much gas over the max rang in the TAC OS then it well pop a check engine light and well not come in again in tell you reset the system

i would pull power / fuse to the unit and see if that helps in a hard reset

Jeff753 · 06-30-2014, 07:34 PM

Quote:

Originally Posted by macantic

Lots of possibilities,may just be a fuse or a simple brake pedal switch adjustment. Good Luck!

How do you adjust the brake switch?

Jeff

jmbci · 07-04-2014, 05:21 PM

Thanks for all of the reply's,I found a way to get the cruise to work, the thing is I believe that the switch is wired backward, when I press rev the cruise will engage sometimes and when I press rev the cruise will engage and when I press set the cruise will disengage. It does work imitatively. Now to my next problem, I cannot find the transmission dipstick, I can find what I thought was the dipstick but it sem to a place where the fluid is powered but no dipstick is attached.