I installed a Genturi exhaust pipe today. I didn't want to lose the look of the chrome exhaust tip, so I installed the Genturi exhaust tip and then found a chrome tip that fit over the Genturi pipe end. I used the same hole that Genturi uses with the pin to pin the chrome tip on.
I had nothing to support the pipe and did not want to install Genturi's metal brackets on the outside of the coach (yuk). I have the fuse panel and electronics bay door where the pipe mounts, so I made a removable bracket that slips in the through the joint between the electronics bay door and fuel bay door (about a 3/8" gap).
I made the bracket from an 1/8" thick wooden gate hinge. I cut one end so that it had two dog ears on it and made a small bracket that the dog ears dropped into. I mounted the bracket at the top right edge of the bay when the door was open. The hinge clears the door as it closes. I added a 14" x 2" piece of steel to the hinge that supports the pipe.
Everything removes in a matter of minutes.
Just thought some others might be interested.
__________________
Don & Mary
2019 Newmar Dutch Star 4018 (Freightliner)
2019 Ford Raptor
|