After you open the pdf, look for the little post it note. Mouse over it and click on it if necessary to get it to pop up.
This may not be your specific unit but should be a good start. Follow your wiring from the gauges etc and when you come to a connector, disconnect and reconnect it several time. Look closely at all of the pins when it is reconnected. Make sure no pins have backed out.
The second pdf is probably spot on for your Diplomat. I have the 2008 Endeavor so they are sister ships.
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008
.
|