Long story short... the gas strut for my rear run bay hatch is now among the debris somewhere on Highway 69 in southern CO. Wondering if anyone with an early 2000's Dynasty can check the weight/force rating of the gas strut on the RRB so I get the right one the first time. The rating is printed on the side of the strut. Thanks in advance.
__________________ Glenn & Mary 2000 Monaco Dynasty 34 York / 2015 Jeep Grand Cherokee Diesel / 2017 Polaris General
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Do you have one strut or two on that bay door? Mine only has one, it's a 60 lb.
Mine has one strut like Dennis has also but mine says 100 lbs. who knows what is original? Mine does not really feel very strong i am guessing it is old and getting weak.... I would have not guessed it would be 100 lbs but it is.
Mine has one strut like Dennis has also but mine says 100 lbs. who knows what is original? Mine does not really feel very strong i am guessing it is old and getting weak.... I would have not guessed it would be 100 lbs but it is.
Rusty
You got me thinking Rusty that I can pop one of the struts off my basement hatch, which is 100 lbs, and pop it on the RRB. If it wants to send the hatch flying I know to drop it down to 60. Thanks for checking too.
__________________ Glenn & Mary 2000 Monaco Dynasty 34 York / 2015 Jeep Grand Cherokee Diesel / 2017 Polaris General
You got me thinking Rusty that I can pop one of the struts off my basement hatch, which is 100 lbs, and pop it on the RRB. If it wants to send the hatch flying I know to drop it down to 60. Thanks for checking too.
There you go just make sure you get the correct length you need also!
. Wondering if anyone with an early 2000's Dynasty can check the weight/force rating of the gas strut on the RRB so I get the right one the first time. The rating is printed on the side of the strut. Thanks in advance.
Linear Mode
