Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 08-25-2009, 02:12 PM   #1
Senior Member
Ed S's Avatar
Join Date: Jun 2007
Location: Wisconsin
Posts: 985
Elect Step Cover Not Working Fully

o6 Endeavor, step cover moves about 1/3 of the way out and stops. I can pull it out the rest of the way with no resistance. Same with retacting. Once cover is fully out it will not pop up into place. Not easy to see inside without removing the retractable step cover. Cover sounds very loose but think what ever controls the movement has come loose or something. Any ideas before I start ripping apart?????

Ed S is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free! RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-26-2009, 06:10 AM   #2
Junior Member
Hooter G's Avatar
Join Date: Sep 2008
Posts: 25
Mine did that (on my '08 Cayman) when one of the kids thought it would be cool to ride the step cover while it was in motion. Under the cover are two pins that connect the drive mechanism to the cover. They had come undone on both sides. You are right - the connections are hard to get to, especially the one on the forward side of the coach. You need to be a bit of a contortionist to get to the forward pin as it is all of the way back under the cover. But it can be done. Hope this helps. The pins snap into a hole in the drive mechanism. It will be obvious where they should fit once you can see them.

Hooter G

Hooter G
Hooter G is offline   Reply With Quote
Old 08-26-2009, 01:42 PM   #3
Senior Member
Ed S's Avatar
Join Date: Jun 2007
Location: Wisconsin
Posts: 985

You are right, that is what the problem was. Thanks a bunch for posting your reply, saved me $$$ at the rv dealer and only took about 15 min to fix. Hope I can return the favor some day.

Ed S is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide STEP issue Executive Monaco Owner's Forum 4 08-30-2012 11:55 AM
Back up camera, mirrors, jacks and step not working JLCHERITAGE National RV Owner's Forum 3 07-04-2009 08:32 AM
A/C cover (shroud) blown off Judy Fleming Alpine Coach Owner's Forum 4 03-24-2009 10:09 PM
Interior Step Cover Commish MH-General Discussions & Problems 11 03-17-2008 12:11 PM
Step Cover - When to Use? JavaJelly Newmar Owner's Forum 9 12-23-2006 03:52 PM

All times are GMT -6. The time now is 12:29 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.