 |
|
01-18-2022, 01:43 PM
|
#1
|
|
Junior Member
Monaco Owners Club
Join Date: May 2021
Posts: 17
|
Fan motor failure punctures radiator 08 Camelot 40PDQ
Hey folks! Wish it weren't the case, but the shaft on the hydraulic motor that runs the radiator fan broke and the fan shot into the radiator and stranded me about 1800 miles from home. Had it towed to the nearest shop but I can't rely on them to track down the right stuff and keep an eye out for my wallet while they're at it. The dealer I bought it from back home suggested I call Veurink's, so I gave them my VIN and all the info I could and they said they'll get back to me. I full time in this, so I need to get this going ASAP and avoid the hotel charges racking up.
I know for sure I need the following:
Radiator (suppose it could be repaired/rebuilt)
Hydraulic Fan Motor
Fan (and any bolts/washers/etc since the original is in a ditch somewhere)
Kit to fix the high fan condition that likely caused this in the first place...
I'd love to know if any of you that have this year/model could take a quick pic of the original fan and hydraulic motor assembly, or at the very least, help me find a suitable replacement. The way it's looking now, the stupid hydraulic motor is going between $1100 and $1350! For a hydraulic motor? INSANE
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
01-18-2022, 01:47 PM
|
#2
|
|
Senior Member
Join Date: Oct 2014
Posts: 7,882
|
That fan motor has been leaking for a very long time.
Did the bearing finally seize, causing the shaft to break?
__________________
Brett Wolfe
Ex: 2003 Alpine 38FDDS. Ex: 1997 Safari Sahara. Ex: 1993 Foretravel U240
|
|
|
|
01-18-2022, 02:30 PM
|
#3
|
|
Senior Member
Join Date: Jun 2011
Location: FL
Posts: 11,452
|
Sorry for your misery. Where are you stuck at?
Source engineering in Oregon might be able to help.
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008
.
|
|
|
|
|
01-18-2022, 02:35 PM
|
#4
|
|
Senior Member
Foretravel Owners Club
Join Date: Apr 2016
Location: Home is Where WE PARK IT...
Posts: 6,055
|
Question.. Where are you at?
__________________
Retired truckdriver,
'02 Foretravel... "This Shack will do"
being pushed by an '06 Scion xB
SKP's of Box Elder, South Dakota
|
|
|
|
|
01-18-2022, 02:36 PM
|
#5
|
|
Junior Member
Monaco Owners Club
Join Date: May 2021
Posts: 17
|
We're near Hermiston, OR about 5 hours away, but I'll give them a call and see if they can help with some good news. Pretty decent folks at Source Engineering?
|
|
|
|
|
01-18-2022, 02:40 PM
|
#6
|
|
Senior Member
Foretravel Owners Club
Join Date: Apr 2016
Location: Home is Where WE PARK IT...
Posts: 6,055
|
Quote:
Originally Posted by JVNomads
We're near Hermiston, OR about 5 hours away, but I'll give them a call and see if they can help with some good news. Pretty decent folks at Source Engineering?
|
Source is a top drawer outfit.
__________________
Retired truckdriver,
'02 Foretravel... "This Shack will do"
being pushed by an '06 Scion xB
SKP's of Box Elder, South Dakota
|
|
|
|
|
01-18-2022, 02:52 PM
|
#7
|
|
Senior Member
Monaco Owners Club
Join Date: Jun 2014
Posts: 14,603
|
This would be a last ditch source but you give them a call
https://rvchassisparts.visonerv.com/...M120052/s1.pl?
When they get the cooling stack out look for a metal tag that will have the information on it.
There should be a name plate on the fan motor, if you could post the info it might help. These motors are hard to find, a good hydraulic shop may be able to help.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
|
|
|
|
|
01-18-2022, 03:01 PM
|
#8
|
|
Senior Member
Join Date: Apr 2020
Location: Parris Island, SC
Posts: 401
|
That is going to be expensive. I just replaced my side radiator and CAC. $6600.00 for both. Parts and labor at Trans West $13,500.00. You have more going on than I did. 4 months for repairs.
The very best of luck to you.
P.S. Check your comprehensive coverage.
__________________
Fast E.
2000 Monaco Executive. 350 Cummins.
|
|
|
|
|
01-18-2022, 04:32 PM
|
#9
|
|
Junior Member
Monaco Owners Club
Join Date: May 2021
Posts: 17
|
Quote:
Originally Posted by Fast E
That is going to be expensive. I just replaced my side radiator and CAC. $6600.00 for both. Parts and labor at Trans West $13,500.00. You have more going on than I did. 4 months for repairs.
The very best of luck to you.
P.S. Check your comprehensive coverage.
|
Appreciate it! I mean, the radiator is punctured, for sure, but the rest of the stack looks good. If it weren't for this hydraulic motor Monaco had some high-school engineering intern spec out, I'd probably make out a fair bit better than you did honestly (no offense, man... It's already past the point of stinging with the $2700 radiator and $360 fan blade quote).
FWIW I'm going to be using this thread to document all of this. Maybe the next poor soul can get something useful out of what I find.
|
|
|
|
|
01-18-2022, 07:00 PM
|
#10
|
|
Senior Member
Monaco Owners Club
Join Date: Sep 2007
Location: Scottsdale, AZ
Posts: 2,321
|
Give these guys a call for your radiator. Give them the year, make model, along with VIN and they will either have the radiator in stock or build you one. They have the build sheets for your Camelot. They are located in Sweet Home, OR.
10Boomer used them with his 08 Camelot and was very happy with them.
https://radiatorsupplyhouse.com
__________________
Harry
2008 Monaco Camelot 40' PDQ
|
|
|
|
|
01-18-2022, 07:52 PM
|
#11
|
|
Senior Member
Join Date: May 2012
Posts: 2,947
|
Quote:
Originally Posted by JVNomads
We're near Hermiston, OR about 5 hours away, but I'll give them a call and see if they can help with some good news. Pretty decent folks at Source Engineering?
|
If you need radiator/CAC parts also call Radiator Supply House, they are located in Sweet Home, Oregon. There number; 855-615-3002. There are soldered on tags for radiator and such, give that to the folks at RSH, they will help. I purchased everything from them, they have all the part numbers for most Monaco’s.
Source is good too for fan, radiator etc. maybe pricer
__________________
Perry & Julie: 2008 Monaco Camelot 40PDQ, 400ISL, Toad; 2015 Chevy Equinox.
[SIGPIC][/SIGPIC]
|
|
|
|
|
01-18-2022, 08:08 PM
|
#12
|
|
Senior Member
Join Date: May 2013
Location: S. California
Posts: 1,379
|
Call source engineering in OR and talk to Jim. Heuse to work for Monaco. He can help you.
__________________
2003 Monaco Knight 36ft PST Triple Slide- 315 ISC
2007 Jeep Grand Cherokee 3.0 Diesel 4x4
2- 2013 Yamaha VXR's 70MPH+. 2019 Sun Tracker 18ft Pontoon w/ 75hp Mercury
|
|
|
|
|
01-18-2022, 08:17 PM
|
#13
|
|
Senior Member
Foretravel Owners Club
Join Date: Apr 2016
Location: Home is Where WE PARK IT...
Posts: 6,055
|
Quote:
Originally Posted by Happycarz
Give these guys a call for your radiator. Give them the year, make model, along with VIN and they will either have the radiator in stock or build you one. They have the build sheets for your Camelot. They are located in Sweet Home, OR.
10Boomer used them with his 08 Camelot and was very happy with them.
https://radiatorsupplyhouse.com |
Yup .. They re-core'd ours and welded up the Air to Air..
__________________
Retired truckdriver,
'02 Foretravel... "This Shack will do"
being pushed by an '06 Scion xB
SKP's of Box Elder, South Dakota
|
|
|
|
|
01-19-2022, 07:40 AM
|
#14
|
|
Senior Member
Monaco Owners Club
Join Date: Jun 2014
Posts: 14,603
|
Quote:
Originally Posted by JVNomads
It's already past the point of stinging with the $2700 radiator and $360 fan blade quote
|
Where is the radiator quote from.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
|
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
