Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 05-17-2011, 07:52 PM   #1
Retired Senior Member
 
RonNBama's Avatar
 
Join Date: Oct 2006
Posts: 1,093
Blog Entries: 22
"Fog Light" question

I decided to "update" the driving lights/fog lights on my '98 Dynasty. Replaced one side and turned them on to compare the old one to the new one. Nothing! Not even a weak glow. Tried bright and dim headlight positions, still no driving lights. Got late before I could check the fuse block. What's the catch here? Motor have to be running or tranny in D before the lights come on? Lights worked last time I checked (Feb time frame).

Ideas?
RonNBama is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-17-2011, 07:58 PM   #2
Senior Member
 
tomwalt's Avatar
 
Tiffin Owners Club
Workhorse Chassis Owner
Join Date: Dec 2010
Location: Northern Virginia
Posts: 1,499
Check it with a volt meter - if you have 12V you have a ground missing. If not - follow it back to the switch/fuse.
__________________
Tom and Amy from Northern Virginia.
2000 Allegro 454/Workhorse P32/TST/Crossfire
Life is a DIY project, so own less and live more
tomwalt is offline   Reply With Quote
Old 05-17-2011, 08:02 PM   #3
Retired Senior Member
 
RonNBama's Avatar
 
Join Date: Oct 2006
Posts: 1,093
Blog Entries: 22
Good point. Just ran out of time today and assumed that something rare and exotic and difficult was hanging over me.
RonNBama is offline   Reply With Quote
Old 05-18-2011, 11:03 AM   #4
Retired Senior Member
 
RonNBama's Avatar
 
Join Date: Oct 2006
Posts: 1,093
Blog Entries: 22
Started the engine and there was light.
RonNBama is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Montana LLC question jbowlby iRV2.com General Discussion 69 02-15-2011 04:22 PM
Outside Windshield Shade Question Barrier2 Monaco Owner's Forum 3 12-08-2009 03:02 PM
Ball Hitch Question CNCCornwall Trailer Towing and Tow Vehicles Discussion 11 09-08-2009 09:07 PM
Towing Question Silversurfah Toads and Motorhome Related Towing 5 07-20-2009 06:17 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 01:44 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.