Garmin 760RV Mount

[ewstoll]

I am seeking advice on the best mount for the 760RV for my 07 Camelot

[PyrateSilly]

We use the bean bag mount that we've had from our old Garmin. We move the GPS from the RV to the car and back as needed and the bean bag mount works for us.

[DtBt]

I had been using a bean bag for years but now have suction cup disks in all of the vehicles that stay better in sharp turns and big bumps.

[BFlinn181]

The suction cup disk works just fine in our RV, I attach the mount at the beginning of a trip and don't touch the mount again until we're home. It'v very secure.

[Dr4Film]

I purchased a RAM mount and RAM cradle for the RV760.

Fully adjustable and rock solid.

Dr4Film ----- Richard

[rbr]

Originally Posted by ewstoll

I am seeking advice on the best mount for the 760RV for my 07 Camelot

I use this cradle:

RAM Cradle Holder for the Garmin dezl™ 760LMT, nüvi® 2797LMT & RV 760LMT

attached to my flat dash panel just above and left of the Voyager monitor on the right side of my dash with this arm and adhesive base:

RAM 1" Diameter Ball Mount with Short, Double Socket Arm, 2.5" Flex Adhesive Base & Diamond Base Adapter; Overall Length: 4.1�

I've used it in this mount for about a year - since it uses the Garmin factory dock inserted into the cradle, the connections all work perfectly, it's easy to get the RV760 in and out, and it's rock solid on the dash.

EDIT: The cradle is the same as Dr4Film, just a different arm and attachment method to the dash. That's one of the nice features of the RAM mount system - lot's of options to customize to your needs. I have one of their mounts for my iPad on the left side of the dash using a combo of two arm segments to get it up where it's at a great position.