Girard Awning in not out

[Biljol]

I have a*Girard Awning on my 2000 exe on the last trip I put it out just fine. The wind picked up so I pulled it in. Now it will not go out I can bring it in but not out.

I opened the controller box and was able to jump the contacts to bring in but not out.

I assume that since it comes in but will not go out the motor and AC current is fine.

A couple of notes my wind sensor has a bad arm I have a replacement but can not get the cups assemble to come off the current sensor. I wonder if it’s not allowing it to go out. I tried pulling on the cups but would not come off.

I am going to look for the dip switch settings to see if I can bypass the wind sensor this weekend.