Well yesterday our dishwasher support system collapsed along the back wall.
Who ever had install this really had no clue as to what to do. They way it was built I am amazed that it lasted this long.
As piece of 1x1 along the back wall with 2 screws and a bunch of staples.
2-4" wide strips of 3/4" plywood butted into the 1x1 and staple to hold it together.
It took 4 hours to do including a trip to the Lumber Yard, but it is now supported to the floor, glued and screwed to the wall and reinforced.
Just can't believe that someone actually thought that would work.