Community Forums

wolf1281 · 01-19-2011, 04:35 PM

The heated mirrors on my 2003 HR
endevor are not working. Checked fuse. It's good. Anyone else have this problem? Solutions welcome. Thanks

bullydogs1 · 01-20-2011, 07:10 AM

I'd start by checking the switch you need a voltmeter...see if 12 v is coming in and then 12v coming out if you turn switch on....If 12v not coming into switch, then it is a fuse, relay in the front run bay(ignition on with this when checking)--if 12 v coming out when switch turned on, then it could be a break in the connector wire to the mirror or a ground. Calling Monaco tech might possibly get you a schematic with the ground point. You'd be surprised what you find when you pull up the panel..it could just be a bad connector to the switch that needs to be reseated. Hopefully that's all it is. Otherwise, the hunt for this will drive you nuts.

wolf1281 · 01-20-2011, 09:14 AM

To late I'm already nut's. The fuse is good. I'll try what you suggested.

dykedelta1 · 02-02-2011, 05:28 PM

Whil onmirrors ,i have damaged heated mirror left side 98 endeaver,looking for heated pane or whole unit .anyoneknow where to find these parts?? John (victim of ice storm Fb 2 2011) John

rex · 02-02-2011, 08:32 PM

Try these folks for parts:

Visone Auto Mart
243 N FIELDS RD
EAST BERNSTADT, KY 40729
606-843-9889

http://en.visonerv.com/cgi-bin/md/M11044/s1.pl??FDS=8110323221.8.22.54.32

KIX · 02-02-2011, 09:25 PM

Quote:

Originally Posted by dykedelta1

Whil onmirrors ,i have damaged heated mirror left side 98 endeaver,looking for heated pane or whole unit .anyoneknow where to find these parts?? John (victim of ice storm Fb 2 2011) John

I have some Velvac parts, including the mirror electrical.......If this may be what you're looking for contact me.

**JohnRR** · 02-02-2011, 09:38 PM

For some reason Velvac only goes back to 99 maybe they used a different brand earlier?
Velvac

dykedelta1 · 02-03-2011, 02:50 AM

i have velvac mirrors style 2025. need inside heated flat pane left side ,this has convex on bottom ,with attachment hardware .or complete top unit where`attaches to swing arm .john 937 430 8298 ,(dykedelta1@aol.com)