Heating and Cooling Zones
Coach is a 2012 Diplomat 43DFT with 3 AC’s and Aquahot, 4 Zones on the thermostat.
The thermostat started acting up giving weird readings, like a set temp of 160. I think the zones got reprogrammed somehow and are all messed up.
I “think” the cool settings and AC’s are programmed properly. I am showing 3 AC zones on the thermostat and the zones correspond to the appropriate AC units. Zone 4 does not show an option for cooling.
As far as the Aquahot... Zone 1 controls the living room and kitchen area (3 registers). Zone 2 controls both the middle and rear bathrooms (1 register in each bathroom). Zone 3 controls the bedroom (1 register). Zone 4 does nothing as far as I can tell. I bumped the set temp up to 80 and none of the registers come on. I even checked the water center heater.
The owners manual indicates Zone 1 is the living room, Zone 2 is the kitchen, Zone 3 is the bedroom and Zone 4 is the bathroom/water center.
I’m wondering if the Aquahot zones are wired incorrectly? The sensor for zone 2 is in the kitchen area right on the main control panel, so it makes sense that the kitchen registers should be wired to zone 2.
I don’t know what to make of zone 4. There is a sensor in the back bathroom for zone 4. If I heat it up the RV Comfort thermostat shows the increase in temperature for zone 4. I don’t know how to activate the water center heater. I do see a box with an adjustment know and I tried turning it, but got no response.
I’m hoping someone with the same heating and cooling setup can tell me what heating zones control which registers.
Thanks,
Dan
__________________
Dan & Denise
Gloucester, VA
2012 Monaco Diplomat
|