I have a 2007 HR Endeavor with three slides. Mt hot water heater is on the curbside. I have an access door in the bay adjacent to the hot water heater and can see the by-pass valves for the hot water heater,but can't reach them from the access door. What am I missing?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Probably engineered by a primate with extra long arms. I assume you're reaching in with the slides retracted? I'd use a forked stick or a little kid to turn the valves.
__________________
Bob & Donna
'98 Gulf Stream Sun Voyager DP being pushed by a '00 Beetle TDI
The bypass is through the small door that you mentioned and and to the left side of that door. To help it would be a good idea to take a small mirror to explore whats inside. On our 08 Holiday Rambler there was enough behind the hot water heater so that I was able to mount the central vacuum in there so you could reach and change replacement bags. Other advice from owners of different makes is nice but sometimes sends you in the wrong direction.
__________________
Mike & Sharon and our Pup Frankie
2008 HR Endeavor 40PDQ
Linear Mode
