How do I raise HWH spacemaker kitchen slide

[Timaz]

I have a HWH spacemaker kitchen slide that I need to raise 1/4 inch the full length...I have been web and this forum searching with no luck. Any Help???

[shootist]

It's a side mount ? Correct?

[Timaz]

Yes, it’s 20’ long and I need to raise the whole length a 1/4 inch.

[CountryB]

You adjust the support rollers under the slide. You access the roller height adjustment from the ceiling in the basement compartments. There are four or five rollers (some also have a roller under the kitchen peninsula, if you have one of those, which you would adjust form the inside)

Here's a photo of one roller at the edge of the slide room (my Kitchen slide with HWH X-slide mechanism). I took this photo when I had the mechanism exposed to fix a hyd leak.

[Timaz]

Originally Posted by CountryB

You adjust the support rollers under the slide. You access the roller height adjustment from the ceiling in the basement compartments. There are four or five rollers (some also have a roller under the kitchen peninsula, if you have one of those, which you would adjust form the inside)

Here's a photo of one roller at the edge of the slide room (my Kitchen slide with HWH X-slide mechanism). I took this photo when I had the mechanism exposed to fix a hyd leak.

Thank you Mike, I will try and look at it tonight.

[Timaz]

Unfortunately mine are an older style with no height adjustment...Mine are on two steal rails with no adjustment. No rollers.

[CountryB]

That doesn't sound like a HWH Spacemaker X-frame design.

Does it look like this (two large beams on the bottom)?

[Timaz]

somewhat but not the same, I will post a picture or two tonight. Mine has some kind of adjustments on the rails. Looks like one for the adjusting in & out and the other for adjusting tilt...but no height. ( straight up and down)