In an earlier thead (can't find) there was a discussion on how much to tighten the attachment bolts on the AC's. I took off the bottom shroud on our AC's and the bolts were pretty loose. Recalling someone said not to overtighten to avoid compressing the foam gasket I only tightened by about 2 turns or so. How tight should these bolts be?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
In an earlier thead (can't find) there was a discussion on how much to tighten the attachment bolts on the AC's. I took off the bottom shroud on our AC's and the bolts were pretty loose. Recalling someone said not to overtighten to avoid compressing the foam gasket I only tightened by about 2 turns or so. How tight should these bolts be?
Sixpack98.....If you reach up into the unit you can feel the foam seal. You should tighten the bolts until you feel it START to compress. Do this at all four bolts.
__________________
Don & Mary
2019 Newmar Dutch Star 4018 (Freightliner)
2019 Ford Raptor
Linear Mode
