I think this is my first time to post. I let my 30 year old brain overload my 76 year old body. I noticed my slide seals were damaged on my 2007 Dynasty so I ordered in new seals. This is the double bulb seal that goes between the wall of the coach and the slide. I had read that this was a doable project. I started at the bottom left side and went over the top of the slide. My problem was that when I got to the upper top corner I discovered the slide was too close to the coach wall and the seal did not have enough room to be installed. I checked the slide mechanism and found a nut on one of the adjustment was completely gone. I got a new one and installed it with the spacing required by HWH but I still have the spacing problem in the upper right hand corner. I downloaded HWH's adjustment instructions but I am not finding anyway to adjust the slide room in the opening. The instructions I have are Ml15.2002 22Dec03. I now believe this is what caused the seals to breakdown. The slide is Hydraulic and as noted is a SpaceMaker. Does anyone have experience with this type slide?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!