Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-07-2018, 09:26 AM   #1
Senior Member
 
Join Date: Feb 2008
Location: SW FLORIDA
Posts: 164
Hydraulic dip stick broken

The dip stick on the screw in cap for the hydraulic system tank on our new to us 2003 Monaco Diplomat has broken. It's broken where the large plastic necks down to approximately 1/4 inch (bottom of the cap). Would someone please provide the following dimensions:

total length of the dip stick (bottom of screw on cap to end of dip stick)
length to the full oil level mark
length to the low oil (add) level mark

With these dimensions I can fabricate a replacement dip stick for the hydraulic storage tank. If anyone has any idea as to how to remove the broken piece of plastic dipstick would be greatly appreciated.

Thanks
__________________
SNAIL1 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-07-2018, 02:44 PM   #2
Senior Member
 
RamiDav's Avatar
 
Join Date: Jan 2016
Posts: 2,186
There is a good chance the dip stick is in the tank .
Mine is a Nelson tank and the cap is actually an expanding type plug
that looks like a screw on cap .
When a person doesn't realize how it works they can keep trying to
unscrew the cap and the dip stick will fall into the tank .

Your tank may be different .

There has been many threads in the past about it and here is one



http://www.irv2.com/forums/f115/nels...ap-132555.html


My cap looks like this
RamiDav is offline   Reply With Quote
Old 09-07-2018, 05:55 PM   #3
Senior Member
 
windsorbill's Avatar
 
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,476
There are a few different styles and sizes of tanks

my tank looks like this
Click image for larger version

Name:	hydraulic tank.jpg
Views:	75
Size:	307.6 KB
ID:	218034

Dip stick looks like this

Click image for larger version

Name:	hydro dip stick.jpg
Views:	61
Size:	182.3 KB
ID:	218035

If your's is similar, I can measure for you.
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
windsorbill is offline   Reply With Quote
Old 09-07-2018, 07:51 PM   #4
Senior Member
 
10Boomer's Avatar
 
Join Date: May 2012
Posts: 2,947
Dang Bill, that tank is spotless! Is it new?
__________________
Perry & Julie: 2008 Monaco Camelot 40PDQ, 400ISL, Toad; 2015 Chevy Equinox.
[SIGPIC][/SIGPIC]
10Boomer is offline   Reply With Quote
Old 09-07-2018, 07:59 PM   #5
Senior Member
 
426smartin's Avatar
 
Join Date: Mar 2014
Location: Campbellsville Ky
Posts: 510

Part #: 1588-KK1-801001
Description: Dipstick w/ cap - Hydraulic reservoir Replaced part number Q347137.


PRODUCT DETAILS

Regular Price: $7.23 Sale Price: $5.44 UOM: Each Quantity:

The search returned 4 parts. Displayed are results 1 to 4.



https://www.rvchassisparts.com:8443/...is/runApp?id=5
__________________
2008 American Tradition 42C 2018 JUL Jeep Wrangler
2004 Newmar Dutch Star 4010 Spartan (Sold)
426smartin is offline   Reply With Quote
Old 09-07-2018, 09:26 PM   #6
Senior Member
 
windsorbill's Avatar
 
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,476
Quote:
Originally Posted by 10Boomer View Post
Dang Bill, that tank is spotless! Is it new?
Harry inspired me!
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
windsorbill is offline   Reply With Quote
Old 09-08-2018, 07:06 AM   #7
Senior Member
 
Join Date: Feb 2008
Location: SW FLORIDA
Posts: 164
Quote:
Originally Posted by SNAIL1 View Post
The dip stick on the screw in cap for the hydraulic system tank on our new to us 2003 Monaco Diplomat has broken. It's broken where the large plastic necks down to approximately 1/4 inch (bottom of the cap). Would someone please provide the following dimensions:

total length of the dip stick (bottom of screw on cap to end of dip stick)
length to the full oil level mark
length to the low oil (add) level mark

With these dimensions I can fabricate a replacement dip stick for the hydraulic storage tank. If anyone has any idea as to how to remove the broken piece of plastic dipstick would be greatly appreciated.

Thanks
Sorry, I was not clear and referenced the incorrect hydraulic system on our coach. My bad !
The tank and system I meant to reference is the system serving the hydraulic jacks for the leveling system. it is located on drivers side near the rear wheel. Inside the door panel are the air conditioning fan, fuel filter and the hydraulic tank and pump for the hydraulic jacks.
Any assistance with this would be greatly appreciated.

snail1
__________________
SNAIL1 is offline   Reply With Quote
Old 09-08-2018, 07:50 AM   #8
Senior Member
 
windsorbill's Avatar
 
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,476
Quote:
Originally Posted by SNAIL1 View Post
Sorry, I was not clear and referenced the incorrect hydraulic system on our coach. My bad !
The tank and system I meant to reference is the system serving the hydraulic jacks for the leveling system. it is located on drivers side near the rear wheel. Inside the door panel are the air conditioning fan, fuel filter and the hydraulic tank and pump for the hydraulic jacks.
Any assistance with this would be greatly appreciated.

snail1
sorry I can't help on that. I have air only leveling.
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
windsorbill is offline   Reply With Quote
Old 09-08-2018, 05:46 PM   #9
Senior Member
 
10Boomer's Avatar
 
Join Date: May 2012
Posts: 2,947
Thanks Bill for the info, I have the short tank by Fleetguard. Could use the new look like yours and Harry’s.
__________________
Perry & Julie: 2008 Monaco Camelot 40PDQ, 400ISL, Toad; 2015 Chevy Equinox.
[SIGPIC][/SIGPIC]
10Boomer is offline   Reply With Quote
Reply

Tags
hydraulic



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oil dip stick tube Robert M Spartan Motorhome Chassis Forum 12 12-14-2017 02:00 PM
Location of Coolant Dip Stick maclonchas Winnebago Industries Owner's Forum 3 01-19-2009 06:06 AM
Dip stick for transmission mom2mastiffs Monaco Owner's Forum 16 11-26-2007 08:32 AM
Dip Stick problem ... 454 in 86 Holiday Rambler Hemi Vintage RV's 5 07-17-2007 12:10 PM
Oil Dip Stick Rit Workhorse and Chevrolet Chassis Motorhome Forum 6 12-19-2005 03:27 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 09:33 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.