Intellec 750/ Iota 50R problem

[jvanfire]

I'm having problem with my shore power switch over in my 07 Safari Simba RD.
When I plug in to 50 amp service (voltage levels confirmed at my power source and reconfirmed at main breaker on the panel) I do not register 50 amps on the EMS readout. No power available on any circuits. The Magnum inverter/charger is working to charge the batteries. What I do have is a clicking sequence behind the breaker panel that repeats every 20 seconds. All breakers on the panel are in the on position.
When I plug into 30 amp power or run the genset everything is hunky-dory.
I have tried removing the 5 amp fuse and reconnecting but that did not help.
Anyone else ever had this problem and how did it resolve? I would like to get this worked out before summer when I will need the 50 amp to run both ACs.

Thanks in advance,

[SPA48]

Don't know where My earlier reply went, so I'll do it again!!!! I have a similar problem with My 50amp shorepower that doesn't always show up after plugging in. I found that if I start My Generator for a short time then shut it down that My shorepower will show up on the panel. Worth a try!!!! I think that the Transfer box sticks between Gen. and shorepower. I know that the new Navistar have a recall out for all 2009 and up for that brand transfer box that you have!!!!

Steve

[Matchayan]

Had similar problems Navistar did recall and replaced with different brand that included surge protection and no problems since then.

[rex]

If you have an Iota transfer switch, GET RID OF IT. They have a history of catching fire. There is a recall out on them but your coach may be to old to qualify. Just the same, get rid of it, and do it now for your own safety.