I have a 2000 watt modified sine wave inverter my remote is in a fault mode it shows backfeed fault
It is a magnum energy inverter I've tried holding the on-off button on the back of the inverter for 15 seconds did nothing thank you
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Makes sense. If the contacts are welded may be more cost effective to replace the relay and possibly any transistors or diodes that may be shorted. Easy to identify a shorted diode or transistor
__________________
“06” Beaver Patriot Thunder , 525 HP C13 Cat
MH 4000 Allison
42 ft Vicksburg, 4 slides
Linear Mode
