the kitchen roll out door has a broken piece of wood at the bottom. This has allowed the cable at the bottom to let go, and the spring loaded door to retract. is there any easy fix. I know I can drill a new hole in the wood. but hooking it back up seems crazy. I think the cable ran over a kitchen pipe. which is also crazy. Any ideas would be great????:
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
the kitchen roll out door has a broken piece of wood at the bottom. This has allowed the cable at the bottom to let go, and the spring loaded door to retract. is there any easy fix. I know I can drill a new hole in the wood. but hooking it back up seems crazy. I think the cable ran over a kitchen pipe. which is also crazy. Any ideas would be great????:
What coach do you have ? -- How about a picture so we`ll know what you`re talking about -- Bill Willard
I think he's talking about the Tambor wood door in the cabinet at the rear of the kitchen slide. It rolls in and out when you move the kitchen slide in and out. I see many of these broken on used coaches.
__________________
97 Monaco Windsor- Sold
07 Monaco Executive McKinley- Sold
04 Monaco Signature Chateau IV
Thanks a lot and you are exactly right. A lot of them are broken because its a bad design so all I really wanted to do is close the door so it looks nice with the slide open. SO it is now a manual door. And I put the slide out and then I closed the door. I Had to release some spring tension. But the kitchen pipes are not being pulled on, and the door is not binding in the track. best fix yet. and thank you for the input.
well I really don't know how to post a picture. I guess its time I learned. this door is like Vito said. it's on the back kitchen wall. and you can not see it when the slide is in. you can only see it when the slide is out. it is wood and looks like the cover on a roll top desk. it is spring loaded and rolls in and out with the slide. I will try to learn how to attach pic's
kitchen
Linear Mode
