Other than replacing the ladder any idea on how to straighten this bend? Put this post in General Discussion section also and only suggestion to date was to cut out the bend and splice in a new section. Still trying to figure that one out. Open to all suggestions and a source for a replacement ladder if that's the only solution. Thanks.
__________________
Richard and Mary Lou
2007 HR Scepter, 42PLQ
Supply Corps, USN Retired
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
We replaced ours ayear ago and the shop got it at the factory in Edwardsburg Mi. If I remember right Atwood bought them some time back, but it is the place that our original ladder came from.. We had a shop in Elkhart do the work..
Mike.. '03 Neptune..PBD 36..
on how to straighten this bend? Put this post in General Discussion section also and only suggestion to date was to cut out the bend and splice in a new section. Still trying to figure that one out. Open to all suggestions and a source for a replacement ladder if that's the only solution. Thanks.
Linear Mode
