iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Anyone have information on the two sockets labeled "ABS BC" (Blink Code), and ABS SW (Switch).
There is nothing plugged in these positions.
Does your ABS light come on (self test) when you turn on the ignition? If not maybe someone pulled those fuses to hide an error and disable it? Where was that box located on your coach?
Well I would check my manual and see if there are any references to those fuses. If you're rig is older maybe it doesn't have ABS and that was a replacement box? I'll look and see if I have one in my compartment. Mines a 2009 and it does have ABS. I would also be tempted to put fuses in those locations and see if they blow, or if I suddenly have an abs light that comes on/stays on after the self test when turning on the ignition...
I looked for a similar box and I do not have one that i can see. If I do have one it may be covered by a panel in the basement. Hopefully someone with a similar model can help.
Linear Mode
