Monaco Keyless entry programming

[dobrien]

Purchased a use 03 Monoco Windsor and trying to program the keyless entry.

I have looked under the passenger cupholder and did not see secret button. Briefly looked under only viable area under dash.. drive feet and also saw nothing.

Can anyone point me in the right direction.

Thanks,

Don

[dobrien]

Purchased a use 03 Monoco Windsor and trying to program the keyless entry.

I have looked under the passenger cupholder and did not see secret button. Briefly looked under only viable area under dash.. drive feet and also saw nothing.

Can anyone point me in the right direction.

Thanks,

Don

[Pusherpilot]

We have an 04 Imperial, essientally the same as yours. The swithc and the LED that indicates when the doors are locked are taped together and hang out from under the dash to the left of the driver cup holder. I suspect that yours are tucked away up under the dash behind the Aladdin joystick. (If you have one) When the doors are locked with the "clicker" the LED blinks about once a second. I leave the wirting out where I can see it, that way I can jujst look at that area and tell if the door is locked. Turn out the lights and lock the doors with the clicker then look up under there for the blinking LED.
Ron

[SmokeyIII]

Originally Posted by dobrien

Purchased a use 03 Monoco Windsor and trying to program the keyless entry.

I have looked under the passenger cupholder and did not see secret button. Briefly looked under only viable area under dash.. drive feet and also saw nothing.

Can anyone point me in the right direction.

Thanks,

Don

Don,
I have 2003 Windsor also. Yours is an old post but I did not see the same answer as I found on mine. In behind the radio, the sensor needed for programming was hiding. I hope you found yours by now.
Mine was working and now the remote works for everything except the main coach door. If anyone has an answer to that, please let me know. All worked yesterday, but, alas, today is a new day.
Cheers,
Jerry

[Jeff753]

I have an 01 Dynasty and thought the reset for the keyless entry was the red button thingy that I could not find. Turns out a call to Monaco gave me my master code for the numeric key-less entry. Once you have the master code you can enter 5 sub codes. Now I am trying to figure out how to program my Ford Key fobs. I think I need to look under the dash panel and behind my radio

Originally Posted by SmokeyIII

Don,
I have 2003 Windsor also. Yours is an old post but I did not see the same answer as I found on mine. In behind the radio, the sensor needed for programming was hiding. I hope you found yours by now.
Mine was working and now the remote works for everything except the main coach door. If anyone has an answer to that, please let me know. All worked yesterday, but, alas, today is a new day.
Cheers,
Jerry