Community Forums

Golfer Guy · 05-07-2016, 09:46 AM

I have an 06 Beaver Monterey with the Multiplex wiring I think its called. In the bedroom both sides of the bed have a pad that controls the reading lights, private bath lights, a spare, and master lights out. However the Master Lights out switch does nothing. I have checked all fuses in the system and all are OK. I assume this switch is turn out all lights at once but it does nothing. Any ideas where to look or how to diagnose this mystery?
Thanks for your input all.

K7JV · 05-07-2016, 02:11 PM

Did you try holding it for three or four seconds? We never use that button on our system in our '06 Dynasty, but certainly could. I want to recall that was not a quick press button. Also, be sure that it isn't an "all" off, rather than just "lights" off. If it does all, you will likely have to turn the water pump and possibly some heating and ventilating system functions back on. I'm assuming you are talking about the Intellitec multiplex system. There is a company that can give support for those systems. They can be reached at MM Electronics at mmrvelectronics@yahoo.com for the email address. They are extremely helpful.

Golfer Guy · 05-07-2016, 05:30 PM

K7JV

Thanks for the info! Wow that does the trick, hold it for a couple seconds and the lights, fans, water pump go out. Just those items controlled by the Intellitec System.

I have been trying to figure that out for a year, asked several shop people like the guys at Guaranty in Coberg, Oregon where the Beaver was built no one knew why it didn't work. They said it couldn't be fixed. Charged me though to look at it.

Thanks
Steve

K7JV · 05-07-2016, 07:58 PM

Fantastic! Yay!!!

I'm very frustrated that Guaranty couldn't help you, and/or wouldn't without you paying a price, particularly after they weren't able to assist!! They are the folks we bought our Dynasty from, back in 2005. Just glad we could help. Now, enjoy that beautiful coach!!