Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-09-2021, 08:49 PM   #1
Junior Member
 
Join Date: May 2019
Posts: 18
Need help finding a 21 tooth gear for my bedroom slide out

I just returned from a 9,100 mile trip. Left 4/17. Arizona to Key West up to northern Maine and back to Arizona. The last morning of our trip my above floor bedroom slide would not retract.
The gear is Power Gear/Lippert part # DN13747, it has 21 teeth. It is listed as obsolete on Lippert website. I know the original manufacturer of the slide out assembly was Dewald. My motorhome is a 2004 Monaco Knight, 34 feet, 330 Cummins. As far as searching salvage yards, does anyone know what years Monaco used Dewald slide assembly's?
Thank You.
dfb101 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-09-2021, 08:56 PM   #2
Senior Member
 
Join Date: Jan 2015
Location: Prescott, Arizona
Posts: 3,071
Blog Entries: 6
RV Salvage Yards: https://rtrvg.com/blog/2017/07/22/us...ards-by-state/
__________________
'04 Newmar MADP, 1100w of solar, towing a lifted Rubicon
ByeTheWay is offline   Reply With Quote
Old 07-09-2021, 10:18 PM   #3
Senior Member
 
windsorbill's Avatar
 
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 3,691
Here's a thread from a couple years ago. Maybe you can find it from a
link within.


https://www.irv2.com/forums/f115/bed...ke-438352.html
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV
windsorbill is offline   Reply With Quote
Old 07-09-2021, 10:58 PM   #4
Member
 
Join Date: Mar 2019
Posts: 35
Have you looked at this wrecking yard? https://rvexteriorbodypanels.visoner...orhomeparts.pl They appear to have several Monaco RV.
deano511 is offline   Reply With Quote
Old 07-10-2021, 11:10 AM   #5
Senior Member
 
Join Date: Jan 2015
Location: Prescott, Arizona
Posts: 3,071
Blog Entries: 6
Hope one of the links above works for you!!
__________________
'04 Newmar MADP, 1100w of solar, towing a lifted Rubicon
ByeTheWay is offline   Reply With Quote
Old 07-10-2021, 03:53 PM   #6
Junior Member
 
Join Date: May 2019
Posts: 18
Thanks for the replies. I have not had any luck with salvage yards. They all reply to my e mail request "that they don't have this gear at this time". Some of the yards are knowledgeable about the gear I need and say they get a lot of request for that particular 21 tooth gear. at this point I think I might need to send it to a machine shop to be made. Until I have a solution I will have to stay home. Ill report back on my progress.
dfb101 is offline   Reply With Quote
Old 07-10-2021, 04:25 PM   #7
Senior Member
 
windsorbill's Avatar
 
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 3,691
Quote:
Originally Posted by dfb101 View Post
Thanks for the replies. I have not had any luck with salvage yards. They all reply to my e mail request "that they don't have this gear at this time". Some of the yards are knowledgeable about the gear I need and say they get a lot of request for that particular 21 tooth gear. at this point I think I might need to send it to a machine shop to be made. Until I have a solution I will have to stay home. Ill report back on my progress.
Definitely not the cheapest way to go, but here's an alternative.


https://www.amazon.com/dp/B08F9SQWCT...osi&th=1&psc=1
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV
windsorbill is offline   Reply With Quote
Old 07-10-2021, 05:25 PM   #8
Junior Member
 
Join Date: May 2019
Posts: 18
Quote:
Originally Posted by windsorbill View Post
Definitely not the cheapest way to go, but here's an alternative.


https://www.amazon.com/dp/B08F9SQWCT...osi&th=1&psc=1
Thanks Windsorbill, My slide out motor is good. I'm trying to find the 21 tooth gear that is mounted on the shaft that the motor turns.
dfb101 is offline   Reply With Quote
Old 07-10-2021, 09:00 PM   #9
Senior Member
 
Join Date: Apr 2010
Location: schaghticoke, new york
Posts: 422
I believe I was able to find a replacement gear for my bedroom slide on E bay

If I can find my purchase record I will post it

2008 Knight DFT
doublechevy is offline   Reply With Quote
Old 07-10-2021, 09:09 PM   #10
Senior Member
 
Join Date: Apr 2010
Location: schaghticoke, new york
Posts: 422
the one I purchased was a 25 tooth

listed under RV Lippert 18.1 Ratio

many listings on E bay replacement gear
doublechevy is offline   Reply With Quote
Old 07-10-2021, 10:35 PM   #11
Member
 
Join Date: Mar 2019
Posts: 35
Try searching for straight tooth gear rack.
https://www.mcmaster.com/rack-and-pi...ent~gear-rack/
They are used in industrial machines quite a bit.

Hope this helps.
deano511 is offline   Reply With Quote
Old 07-11-2021, 08:03 AM   #12
Junior Member
 
Join Date: May 2019
Posts: 18
Thanks everyone. I'll post my results.
dfb101 is offline   Reply With Quote
Old 07-11-2021, 08:23 AM   #13
Senior Member
 
Join Date: Apr 2018
Location: North Florida
Posts: 130
I had a similar problem with a ring gear on my home diesel generator. None to be found. I took it to a local machine shop who rebuilt the ring gear replacing the missing teeth and worn teeth. It took about a week but actual work was probably less than a day. When it was finished it looked like a new ring gear. the cost was 150 dollars.

I agree with dfb101 take it to a machine shop, explain the urgency of haste, and get it rebuilt. They can work wonders.
tanman32225 is offline   Reply With Quote
Old 07-11-2021, 10:20 AM   #14
Junior Member
 
Join Date: May 2019
Posts: 18
Quote:
Originally Posted by tanman32225 View Post
I had a similar problem with a ring gear on my home diesel generator. None to be found. I took it to a local machine shop who rebuilt the ring gear replacing the missing teeth and worn teeth. It took about a week but actual work was probably less than a day. When it was finished it looked like a new ring gear. the cost was 150 dollars.

I agree with dfb101 take it to a machine shop, explain the urgency of haste, and get it rebuilt. They can work wonders.
Thanks tanman. Problem is here in Lake Havasu AZ the machine shops are 3 months out and not taking on any small jobs.
dfb101 is offline   Reply With Quote
Reply

Tags
need help, slide, slide out



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need help finding this slide out switch nhcouple Class A Motorhome Discussions 3 11-05-2020 04:17 PM
Power Gear gear slipping on axle. Just a pin holding gear in place? mjeffrey RV Systems & Appliances 2 05-03-2019 09:19 AM
RBT 15 tooth gear ccookson 5th Wheel Discussion 0 06-28-2017 03:12 PM
Help, bedroom slide won't extend out. Need help!? Goldseabreeze National RV Owner's Forum 12 06-08-2016 08:33 PM
Broken gear tooth / sheared pin on 2007 Open Bay 35 TSA PapaBobby Tiffin Owner's Forum 7 09-03-2013 08:59 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 06:04 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.