Need Rotors for 2006 Monaco Dynasty

[Buddy Babb]

I need to find the part numbers for new rotors for my 2006 Monaco Dynasty. Finding various threads about brakes but nothing definitive about the rotor part number.

Any help or direction is appreciated.

[Chargerman]

There should be a tag on your front axle with make and model #. With that info a truck center should be able to help you with rotors
You might also have luck by posting on monacoers.org site. A lot of very knowledgeable Monaco folks there

Good Luck!

[andy29847]

My coach is not Monaco, but when I did my brakes, I pulled a rotor and took the part number on the rotor to NAPA. The parts on my coach are the same as found on thousands of school busses and medium duty trucks.

[Ray,IN]

Originally Posted by andy29847

My coach is not Monaco, but when I did my brakes, I pulled a rotor and took the part number on the rotor to NAPA. The parts on my coach are the same as found on thousands of school busses and medium duty trucks.

Yup, these chassis parts are not special-made for any coach maker, it would be far too expensive. Some build their frame from scratch, but the suspension parts, headlamp assy,wiper assy, etc are standard truck/bus parts.

[e4services]

Well, you are in luck, I replaced mine after seeing bad radial cracks in the Bendix rotors. I was bent on NOT using Bendix parts and started an extensive search.
CENTRIC 120.86007 Rotors, and they are really nice, been on for a year now.
Found Meritor MMD1441AF pads that include the hardware. the Centric part was not available (CENTRIC 106.14410). Order through FinditParts. It took months to receive them, but finally got them. They are massive/heavy.

THe research started IDing the axle (Dana-Spicer)and the Bendix Brake assembly (ESD225). My Calipers were listed as p/n 977699
Hope this helps