Pulled MH out of storage today. Started it up and everything was working. Went to the dump station to flush the tanks. The generator was running. Started to show my DW the tank monitor function and suddenly all DC stopped working.
RC-7 panel for the inverter shows the inverter working as does the light on the inverter.
Checked all fuses that I could find and changed the continuous duty solenoid for the domestic side. No go. On both the original and the new solenoid if I jumper the solenoid the lights will come on.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Oops. Turned out to be the infamous salesman switch. Why the DC suddenly failed when we were both far from the switch shall remain a mystery, akin to where one would find Sasquatch this weekend, although we will keep an eye out for our furry neighbor when we cross over the North Cascades this weekend.