|
|
02-19-2018, 07:46 AM
|
#1121
|
Senior Member
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,485
|
Quote:
Originally Posted by mhughes
I have the exact same steps. That is my next project as well.
In the meantime I have the living room slide ready for carpet. And like Perry the plastic strip had come loose so I added a few low profile screws.
I'v ordered the new Mohawk air.o carpet that has the 1/4" felt pad bonded to it. We'll see how it looks on the living room slide since the original carpet had no padding.
There is a carpet sample in the picture.
|
Mike,
that's the same floor plan as mine. I hope to change out my carpet later this year. When I installed my wood floors, I pulled up the carpet 'flap' so I could get up to the slide. My black plastic flap is actually 2 pieces with about 12" separation. I didn't really pay attention to it until I saw your picture.
Does your carpet go under the cabinet in your picture?
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
02-19-2018, 07:49 AM
|
#1122
|
Senior Member
Monaco Owners Club
Join Date: Sep 2007
Location: Lancaster, CA
Posts: 606
|
Original carpet is under the cabinet. I trimmed it flush and will tuck the new carpet under and staple along the edge.
__________________
Mike and Wanda
2008 Safari Cheetah 38PDQ, 350 C7, TRW, F/R X-Bars, F/R Watts, FSD, STP, TST, RF18, SeaLevel II, 800w Renogy PV, 2016 F150 4x4, Blue Ox, AFO, LSL TC, Battleborn
|
|
|
02-19-2018, 08:19 AM
|
#1123
|
Senior Member
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,485
|
Thanks Mike.
These projects don't seem to end.
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
|
|
|
02-19-2018, 09:12 AM
|
#1124
|
Senior Member
Join Date: May 2012
Posts: 2,947
|
Quote:
Originally Posted by mhughes
I have the exact same steps. That is my next project as well.
In the meantime I have the living room slide ready for carpet. And like Perry the plastic strip had come loose so I added a few low profile screws.
I'v ordered the new Mohawk air.o carpet that has the 1/4" felt pad bonded to it. We'll see how it looks on the living room slide since the original carpet had no padding.
There is a carpet sample in the picture.
|
Looks great. Did you have a ton of staples, or was I the lucky one!🤣
__________________
Perry & Julie: 2008 Monaco Camelot 40PDQ, 400ISL, Toad; 2015 Chevy Equinox.
[SIGPIC][/SIGPIC]
|
|
|
02-19-2018, 09:24 AM
|
#1125
|
Senior Member
Monaco Owners Club
Join Date: Sep 2007
Location: Lancaster, CA
Posts: 606
|
Not a ton of staples. Most came out with the carpet. In all I spent less than an hour removing staples that were left.
__________________
Mike and Wanda
2008 Safari Cheetah 38PDQ, 350 C7, TRW, F/R X-Bars, F/R Watts, FSD, STP, TST, RF18, SeaLevel II, 800w Renogy PV, 2016 F150 4x4, Blue Ox, AFO, LSL TC, Battleborn
|
|
|
02-19-2018, 09:44 AM
|
#1126
|
Senior Member
Join Date: Aug 2015
Posts: 6,972
|
Quote:
Originally Posted by mhughes
Pulled out the bed box to fix the grooves the rollers had dug into the wood (sagging and dragging on carpet).
Anyone have closeup pictures of how they braced the bed box with the aluminum angle and SS plates on the bottom?
10Boomer's carpet turned out so nice I think I'll follow his lead and replace mine.
|
Here you go.
http://www.irv2.com/forums/f115/powe...ml#post3952745
__________________
Mark
2008 Holiday Rambler Admiral 30PDD (Ford F-53 chassis)
2009 Honda Fit Sport
|
|
|
02-19-2018, 04:02 PM
|
#1127
|
Senior Member
Monaco Owners Club
Join Date: Sep 2007
Location: Lancaster, CA
Posts: 606
|
Got a call today saying my carpet won't arrive for another week and a half.
Time to think of another project in the meantime.
__________________
Mike and Wanda
2008 Safari Cheetah 38PDQ, 350 C7, TRW, F/R X-Bars, F/R Watts, FSD, STP, TST, RF18, SeaLevel II, 800w Renogy PV, 2016 F150 4x4, Blue Ox, AFO, LSL TC, Battleborn
|
|
|
02-19-2018, 05:06 PM
|
#1128
|
Senior Member
Join Date: Oct 2017
Location: Twain Harte, CA
Posts: 105
|
You guys are a wealth of information. After reading your posts I looked and have some wearing under the bed from the rollers. I looked at the exterior bottoms of all my slides and have no rot or separation, may still look into the Guardian Plates that I have seen you guys refer to. We just picked up our 07 Diplomat last October and have been doing some minor things, new stereo and sub-woofer, Progressive EMS-HW50 surge protection (installed after the gen xfer switch) Garmin 770 w/backup camera, Tire Pressure Monitor System, TS Performance module. And led lights and new Lifeline AGM batteries. Fixing a lot of cabinet hinge screw holes. Looks like the Guardian plates and bed rails may be next year, possibly flooring and carpet as well. You guys have already addressed a lot of my questions here on the how to areas. Looks like I'll have to come back for more answers. Heading off to Moab the to OK City in April, that will be our first trip over a week since we got the coach, the off to Alaska this summer.
|
|
|
02-19-2018, 06:21 PM
|
#1129
|
Senior Member
Join Date: Jun 2011
Location: FL
Posts: 11,452
|
How are folks binding the edges of the carpet?
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008
.
|
|
|
02-19-2018, 06:45 PM
|
#1130
|
Senior Member
Monaco Owners Club
Join Date: Oct 2016
Location: Las Vegas, Nevada
Posts: 299
|
Quote:
Originally Posted by 10Boomer
Presto chango Bill.
[ATTACH]
|
Add me to the list of people that want to upgrade their entry steps. I have always appreciated the practicality of the easy to clean vinyl steps, but at the same time I hated the aesthetics of the plain black color.
I saw Perry and Harry's entry steps at Quartzite and fell in love with their beautiful workmanship that solves the aesthetic issue with a solution that is far superior to what Monaco used for my era Camelot.
Looking forward to seeing photos of how bill's entry turns out as well.
Jim
__________________
2006 Monaco, Camelot 40 PDQ, 400 ISL
Watts links, Cross Braces, RF18
2012 Jeep Wrangler JKUR
|
|
|
02-19-2018, 08:20 PM
|
#1131
|
Senior Member
Monaco Owners Club
Join Date: May 2015
Location: Where I happen to land
Posts: 2,529
|
__________________
John and Debi
2008 Beaver Contessa, 2005 Jeep Grand Cherokee,
28 years retired Fire Captain Tales of the Muttley Crew
|
|
|
02-19-2018, 08:52 PM
|
#1132
|
Senior Member
Monaco Owners Club
Join Date: Oct 2016
Location: Las Vegas, Nevada
Posts: 299
|
Hey John,
Yours also looks great. I didn't see it at Q. Very nice job.
__________________
2006 Monaco, Camelot 40 PDQ, 400 ISL
Watts links, Cross Braces, RF18
2012 Jeep Wrangler JKUR
|
|
|
02-19-2018, 09:02 PM
|
#1133
|
Senior Member
Monaco Owners Club
Join Date: May 2015
Location: Where I happen to land
Posts: 2,529
|
Quote:
Originally Posted by zo66
Hey John,
Yours also looks great. I didn't see it at Q. Very nice job.
|
Thank you!
__________________
John and Debi
2008 Beaver Contessa, 2005 Jeep Grand Cherokee,
28 years retired Fire Captain Tales of the Muttley Crew
|
|
|
02-19-2018, 09:25 PM
|
#1134
|
Senior Member
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,485
|
I saw Johns and Perrys at QZ. Both impressive. I didn't see Harry's, however.
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|