Community Forums

artdeco · 04-04-2021, 09:18 AM

Had the same problem with the Allegro we traded in: Cannot find the type/part number for replacement windshield wipers. I've scoured the manual and just don't see it. Thanks for reply!

jacwjames · 04-04-2021, 10:30 AM

I gave up on the ones that were OEM, I had a problem with the windshield wipers being lifted off the windshield in high wind or when a truck would pass.

I went with shorter ones, last ones I purchased were 28". My wipers bolt on, a pain to change but if you find a pair that doesn't have the holes in the right location you can usually drill a hole and make them work. I've done this for the last ~10 years.

MSHappyCampers · 04-04-2021, 10:40 AM

You might try O'Reilly's Auto Parts. They were able to look up wiper blades for our 2002 Monaco Windsor and order a set. VERY expensive! I think they were around $39 each!

I will be changing to the 28" next time I need them!

hypoxia · 04-04-2021, 10:43 AM

Quote:

Originally Posted by artdeco

Had the same problem with the Allegro we traded in: Cannot find the type/part number for replacement windshield wipers. I've scoured the manual and just don't see it. Thanks for reply!

Some Monaco have AM Equipment wiper system https://www.amequipment.com/
Others such as mine have Diesel Equipment Co. Wiper Technologies wiper system. Wiper Blades TRU Vision Motorhome RV

If it is a Wiper Technologies system there should be a label on the wiper motor with a "Monaco Kit" number. If this is the case call them and order directly from them. They will need that kit number.

The original blade is not that expensive if you buy two sets.

Outbound · 04-04-2021, 10:49 AM

I replaced mine at Napa auto parts, I took old one off and they matched it.

rpasetto · 04-04-2021, 03:40 PM

I also gave up on the 32" blades, long ago, when I had my Dynasty I bought a set which turned out to be so old the rubber went bad quickly. I decided to buy some 28" blades in Walmart. My Sig is the same and I continue to pick up the sturdiest blades available at whatever auto parts seller is near. Most of these of these have plastic clips on a rivet for j-hook mounts. It's easy to drill out the rivets; the hole left is on center which fits the bolt exactly.