Replacing flooring, thickness Question.

[skinr1]

We are going to replace the flooring in Agnus in the next couple of weeks. We are going to leave the carpet in the bedroom area but from there forward it will be a waterproof laminate. We have a Pergo product picked out but it’s 10mm think with an attached underlayment and unsure if that’s to thick and will cause a problem or not with slides. Any input is greatly appreciated before we spend $600 on the flooring.
Thanks

[jl.kauai]

I had the same issue when I did my Lazy Daze years ago. I found a nice color in the same brand at Lowes and it was 8 mm. Worked great as the 10 mm was just too thick. Had to special order. Travato John

[William Willard]

You should consider using engineered hardwood -- Easier to use than the Pergo stuff --

[skinr1]

Thanks for feedback. I went and measured the thickness of the small wood flooring at the kitchen area and sure enough it’s only 8mm. So we are back to looking at samples for flooring replacement. It’s all good as I’m still nursing shoulder after surgery and can’t get started anyway until probably mid January…I hope.