Salesman switch / relay

[YC1]

Originally Posted by vito.a

Can you just combine the two cables on the left to bypass and still power the propane gauge?

Without doing some schematic work or voltage readings I doubt it. The breaker is likely the supply to the solenoid but I have not looked at it in a long long time.

[Iceclimber]

Originally Posted by vito.a

Can you just combine the two cables on the left to bypass and still power the propane gauge?

I just used the studs as they were, stole the jumpers off the latching relay and wired them back as they were. As mentioned I added the 50 amp breaker back in between the coach positive and the round trip cable back to the 12v board.