I have an 08 Holiday Rambler Endeavor what kind of sealant do you use on top of the slide outs?
I don't think you can use dicor or silicone on the top of the slide out box because it doesn't Harden
thank you
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I did mine with FlexSeal (the can of white stuff). I used it on all seams etc on the roof with good success. But...if it's not smooth and allowed to thoroughly dry on the slide outs the wiper seal can remove it. It depends also on what kind of seals your unit has. I replaced mine with the really heavy duty rubber ones and they are very tight. If it still had the foam seals it would be no issue at all.
Linear Mode
