Community Forums

trcastan · 02-08-2018, 01:14 PM

Have a 2001 Monaco Dynasty, searching for the fresh water hose bib (connector). Is currently leaking and would like to replace. Thank you for any help that can be provided. Have learned a lot reading through all the forums. Thank you.

barmcd · 02-08-2018, 01:21 PM

Is that picture sideways? I replaced mine with one of these.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

falconman · 02-08-2018, 02:53 PM

That may be a pressure regulator/ restrictor. See if you can get a look at it above the panel. If you do replace it you may eliminate that feature.

trcastan · 02-09-2018, 09:08 AM

Thank you for the replies, the pic is sideways. Will get it apart this weekend and let yall know what I find.

barmcd · 02-09-2018, 10:47 AM

There will be a check valve above or integrated with your hose bib. The one I linked has a check valve built in. I had to measure the distance between the coach plumbing and the panel in the wet bay then take the valve to the hardware store to figure out how to make it that length. I ended up having to shorten a PVC coupler.

trcastan · 02-10-2018, 07:16 PM

Thank you for the replies

adamfolger · 02-10-2018, 08:05 PM

Op, you have a brass quick connect slip fitting and it is leaking because it is encrusted with green scale, caused by hard water. If you can soak the slip connecter in CLR, it will work like new. Do the same with the bib fitting. As you know, it is impossible to get behind the panel, without removing the entire water bay fiberglass panel. The upper removable panel is no help. I should note...My 2001 Dynasty Jack was built in early 2002, so our water bays may be different. But the fitting in your pic IS a slip connecter.