Community Forums

caymann · 07-15-2013, 01:11 PM

I am looking to buy new bolts for the Monaco curved shower door.
These bolts are made of brass (likely) and are "off centered"
The two bolts work at perpendicular orientation from each other to form a seal with the shower.

The other day, while tightening, i cranked a little hard (shouldn't have done that) and the bolt broke off. So i need a new bolt and some extra in case...

Does anyone know of a vendor that sells them.
I don't necessarily need OEM parts.

thanks
jim

Dennis_K · 07-15-2013, 03:17 PM

The shower was probably made by SEA (Shower Enclosures of America Shower Enclosures of America, Inc.) and there should be a sticker or logo somewhere to confirm that. I'll bet if you call then they will help you out. I worked with them a few years ago, fantastic service.

caymann · 07-15-2013, 03:25 PM

Hi Dennis
My shower door says "Cesana".
It appears to be an italian company.
That sounds $$$$...i am looking for an american alternative.
Just want the bolt.
thanks
jim

Drifter · 07-15-2013, 03:38 PM

http://cdn.irv2.com/forums/attachmen...7&d=1328326673

caymann · 07-15-2013, 03:50 PM

I am attaching pics of what i am looking for:-

These are all a part of the roller.
This is what is inside the roller.

thanks
jim

SPA48 · 07-16-2013, 02:03 AM

Hey Jim this might help out alittle I couldn't get Drifters page to go anywhere but He did have the right info listed!!!!!

Cesana USA Inc.

Architects & Designers Building
150 East 58th Street - 9th Floor
New York NY 10155

phone 212-308-5300
fax 212-308-5303

www.cesanausa.com
info@cesanausa.com

caymann · 07-17-2013, 10:20 AM

Just called them and they don't represent cesana anymore
Only other option is a reseller in CT. Her name is Pam.

Price for one roller is $110....

I am going to take off that door and put a shower curtain, for now, until i can digest this price

caymann · 07-17-2013, 10:24 AM

Has anyone tried using off the shelf rollers from local home store?
OR
Maybe substitute the off centered roller bolts with a normal one + do some nifty trick to get the shower door seal?
jim

mfire1339 · 07-17-2013, 11:07 AM

Maybe try McMaster-carr?

Mike

SPA48 · 07-17-2013, 04:08 PM

How about calling Italy where the home of the manufacture is--can't be that expensive to ship!!!! or call some motorhome salvage yards!!!!

Steve

Mr_D · 07-17-2013, 04:24 PM

Quote:

Originally Posted by caymann

Just called them and they don't represent cesana anymore
Only other option is a reseller in CT. Her name is Pam.

Price for one roller is $110....

I am going to take off that door and put a shower curtain, for now, until i can digest this price

WOW!!

We took our shower door off and use a shower curtain, but it's because we keep the litter pan in there and the door was in the way when open.

sirpurrcival · 07-17-2013, 04:56 PM

You can try these guys. Lots of Monaco Motorhomes there.

RV Exterior Body Panels Used RV Parts For Sale | rvexteriorbodypanels.visonerv.com

Topman · 07-18-2013, 01:10 AM

Hmmmm...
Would it be possible to cut off the broken bolt. Drill into the housing, tap the hole and put in either a threaded insert with a nut or just a bolt?
I would try it.
Iver.

caymann · 07-18-2013, 08:42 AM

I tried the salvage parts store and they want to sell me the whole shower.
Without the rollers, the shower door is useless. I can understand that.

Actually, i bought a (used) big boy relay from them once and regret my decision.
They say they test everything, however that was not what i experienced.

jim