Slide out clearance issue 1998 Monaco Windsor

[Randy3282001]

Recently I replaced the tile floor in kitchen area, doing so It raised the floor about 1/8" . The slide out outer frame catches on the tile when bringing slide out in. How do I use the height adjustment bolts? There's a hex wrench spot on the lower side of the bolt and a 1-1/4 nut.
I also replaced the "rolling pin " rollers as they were damaged.

[jacwjames]

My LR slide has the kitchen cabinets in it. I have four roller under it, two are accessed through the bottom of the kitchen cabinets by removing one drawer and lifting the false floor under the sink. The other two rollers are accessed from in the basement and/or front drivers side wheel well.



The rollers are adjustable, I had to tweak the ones under my kitchen cabinets as the front of the slide started to drag on the tile floor. One or two turns of the bolt and that's all it took.

[Randy3282001]

Originally Posted by jacwjames

My LR slide has the kitchen cabinets in it. I have four roller under it, two are accessed through the bottom of the kitchen cabinets by removing one drawer and lifting the false floor under the sink. The other two rollers are accessed from in the basement and/or front drivers side wheel well.



The rollers are adjustable, I had to tweak the ones under my kitchen cabinets as the front of the slide started to drag on the tile floor. One or two turns of the bolt and that's all it took.

Thanks for your thoughts. I also need to adjust the outside frame.