Terry, if the slide on the passenger slide is the raised floor type rather than flush it will most probably have 3 rollers like mine does. On my coach two of the rollers the back and center look to be accessible by removing a plastic panel just inside the compartments. The front panel is inside the passenger side front wheel well and covered with undercoating spray. You might give the guys at Elite Repair and Remodel (Marty: (541)-517-1716 Erik: (541)-255-6231) a call. They are ex Monaco techs who started their own company when the old Monaco went under. They are extremely helpful and if you need parts they will either sell them to you or tell you where to get them. On my coach the frig is on the drives side in a flush floor slide. They rebuilt the rollers on my refrigerator slide and placed stainless plates on bottom of both ends of the slide to repair damage done because the fridge weighs so much. Did a great job.
__________________
Brian, Loretta & Lucy (Golden Retriever)
2008 HR Endeavor 40 PDQ , ISL 400
2010 Dodge Ram 1500 Toad
|