Slide Room Problem "HR"
Hi gang. I'm working with a 2012 HR Ambassador. It has a full wall cable driven slide on road side and 2 small slides on curb side. The front curbside slide is a dual motor gear driven system. The controller is a Powergear 1510000122 Dual Sync controller.
The issue is, when you press "out", only the #1 motor (front) runs out. When you press "in", only the #2 motor runs in. The unit has dual switches to control this room, with one being above the driver's left ear and the other in the mid body hallway. The function is the same whichever switch you try to use.
I found a good link for the specific controller at Powergearus.com but it doesn't list my particular problem in the troubleshooting.
Any advice is greatly appreciated.
ASE Master Med-Heavy Trucks