RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-27-2019, 04:37 PM   #1
Senior Member
 
Join Date: May 2015
Posts: 153
Slide seal detached at bottom

Hi All,

The rear passenger slide seal on our 2006 beaver patriot thunder pulled away from the metal teeth on the bottom 4 inches of the seal. I can clearly see the metal teeth. I attempted to stuff it back in, but it is a tight fit and doesn’t seem to be quite grabbing the teeth. This happened because a tech put eternabong tape in the corners, but when the slide moved in, the tape began to pull up. When the slide came back out, the adhesive on the tape pulled the seal out.

Does anyone know if the seal only needs to go back on the teeth or is there a sealant involved, as well.

Thanks,
Rick
__________________

kb1flr is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-28-2019, 07:00 AM   #2
Senior Member
 
spdracr39's Avatar


 
Monaco Owners Club
Join Date: Jul 2016
Location: Cabot, Arkansas
Posts: 2,709
My first thought is to remove the cause, the eternabond, or it will just happen again. You can sometimes repair the seals with Black 3m weatherstrip adhesive. It makes a very strong bond.
__________________
2004 Beaver Monterey Laguna IV
Cummins ISC 350HP Allison 3000 6 speed
2020 Chevy Equinox Premier 2.0t 9 speed AWD
https://enjoying-life.net
spdracr39 is offline   Reply With Quote
Reply

Tags
seal, slide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kitchen counter detached from slide out - help Btrunner MH-General Discussions & Problems 5 03-22-2019 08:37 AM
03 Phaeton - Gen slide cable detached. Any easy way to get gen slide out? michelb Tiffin Owner's Forum 4 12-03-2012 06:22 AM
Replacing Bottom Slide Seal sgtjoe National RV Owner's Forum 16 09-25-2012 12:37 PM
Replacing Bottom Slide Seal sgtjoe National RV Owner's Forum 3 09-16-2011 01:29 PM
2006 Sightseer 30B bottom slide out seal Frank111 Winnebago Industries Owner's Forum 6 11-08-2007 09:46 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 05:29 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×