Slide Wire Sausage

[Haddock]

Open to suggestions on how to prevent this wire sausage from getting mangled when operating the slide. It had to be attached at one point. Just saying that I don't want to loose a limb trying to manually keep it from the sharp parts. Thanks in advance on any input.

Edit: I already reattached the ground wire.

[Jyrocharlie]

Adel clamps: https://www.amazon.com/adel-clamps/s?k=adel+clamps

[Haddock]

Thanks for the input. As for the installation. Would you use a self taping screw or just drill a hole through the box and use nuts and bolts. Any idea how the factory attached this thing?

[Jyrocharlie]

as long as that piece of iron isn't really thick a self tapper should work fine. I have no idea how the factory routes it.

[Haddock]

Originally Posted by Jyrocharlie

as long as that piece of iron isn't really thick a self tapper should work fine. I have no idea how the factory routes it.

There's no way that it can attach to the beam, it slides into a carrier.