Smart Wheel high beam low beam switch

[scott 61]

Has anybody changed their high-beam low-beam turn signal switch I cannot put high beams on I was wondering how hard it is to change 08 Holiday Rambler endeavor

[Captjake1]

That is part of the turn signal switch. Separate the plastic covering of the wheel and it looks like a couple screws.
Check your relays first though!! I was almost there last week, then found a bad relay.

[scott 61]

The turn signal handle does not move up and down that's why I think it's the switch

[Captjake1]

Originally Posted by scott 61

The turn signal handle does not move up and down that's why I think it's the switch

Gotcha. Didn't look hard, looking at the replacement part.
Looked like the handle came out separate from the switch.

[scott 61]

Any idea where to get the switch

[Captjake1]

Originally Posted by scott 61

Any idea where to get the switch

I searched 'douglas steering column'
Lots there, the rv places were over $200. This one is like $65 https://www.ebay.com/i/232698385305?...D1489557873105
Double check it closely though. I can't find the exact one I was lookng at

[scott 61]

Thank you I guess next step is to take it apart and get a part number and possible name

[Captjake1]

They looked to be pretty standard on that Douglas Column.
Best of luck.