Community Forums

manxadian · 06-22-2014, 04:06 PM

My 2006 Holiday Rambler Endeavor has an open circuit from the SmartWheel clockspring connector at the base of the steering column to output side of the clockspring. I am looking for a SmartWheel (V4 Series with an SM211 controller) clockspring supplier. Any help in locating one would be much appreciated.

Thanks,
Marty

palehorse89 · 06-23-2014, 05:55 AM

Hello Marty, Here is a link to troubleshoot the smart wheel http://www.rvtechlibrary.com/electro...leshooting.pdf if you need it.
And I looked for a bit, but did not find a place to buy one, I had seen it posted before on here, but can't find it.....
https://www.google.com/search?q=+clo...=10&gws_rd=ssl
I think I saved a link for it, if I find it I will post it for you.
This might be it http://www.vipwheels.com/technical-support

manxadian · 06-24-2014, 05:52 AM

Palehorse89,
Thank you for the information. I have contacted VipWheels who have provided me with a part number for the clockspring. As VIP only supplies parts to OEMs I now have to contact Monaco to order the part.
Thanks again for the help.
Marty

palehorse89 · 06-24-2014, 06:42 AM

Your welcome Marty, I am glad you are on your way to getting it fixed.

Gordon66 · 06-24-2014, 12:40 PM

Try here it may be cheaper than Monaco.
https://veurinksrv.stores.dealerspik...x?zpid=5753236

manxadian · 06-24-2014, 05:00 PM

Gordon66,

Thank you for providing the link. I am out of town right now but will start checking when I get home tomorrow afternoon. I will call Monaco first now that I know what Veurinks charges.

I will let you know where I finally purchase it.

All the best,
Marty

manxadian · 06-25-2014, 03:23 AM

Palehorse 89,
A correction in my reply to you. I actually acquired the part number for the clockspring kit from Douglas Autotech who are the manufacturers of the steering column and install the clock spring as part of the assembly.

Sorry about that,
Marty

manxadian · 07-07-2014, 09:19 AM

I opted to ordered the part from Monaco at a cost of $300.91 plus $17.11 for shipping and handling. The individual I spoke with at Monaco was excellent to deal with. After ordering it I discovered that it was quite a bit cheaper at [www.rvchassisparts.com. Their cost was $230.42 plus shipping. I have just finished installing the part and everything is working as it should.

Thanks to all for the help.
Marty

palehorse89 · 07-09-2014, 03:40 AM

Thank you for posting your update and glad to hear all your problems have been solved,,,,,,,,,,safe travels to ya.

Elevensdad · 10-31-2017, 03:21 PM

Quote:

Originally Posted by manxadian

Palehorse89,
Thank you for the information. I have contacted VipWheels who have provided me with a part number for the clockspring. As VIP only supplies parts to OEMs I now have to contact Monaco to order the part.
Thanks again for the help.
Marty

I spoke with VIP, and they claimed no k owdge of mfgr or part number for clock spring. Please provide that information here.
Thank you.

jacwjames · 10-31-2017, 08:32 PM

This is a source for a replacement clockspring for my coach

https://www.rvchassisparts.com:8443/...is/runApp?id=5

Burgy · 10-31-2017, 10:02 PM

http://www.irv2.com/forums/f115/cloc...ty-257450.html

Jeff753 · 08-17-2020, 12:26 PM

Quote:

Originally Posted by manxadian

I opted to ordered the part from Monaco at a cost of $300.91 plus $17.11 for shipping and handling. The individual I spoke with at Monaco was excellent to deal with. After ordering it I discovered that it was quite a bit cheaper at [www.rvchassisparts.com. Their cost was $230.42 plus shipping. I have just finished installing the part and everything is working as it should.

Thanks to all for the help.
Marty

Do you have the part number? How do you get the center pad off just pull it?

palehorse89 · 08-17-2020, 12:34 PM

Quote:

Originally Posted by Jeff753

Do you have the part number? How do you get the center pad off just pull it?

Might want to send a PM to the folks that did the repair , this is a 6yr old thread and last post was in 2017 Jeff. They might not see your post .......