|
04-26-2014, 04:29 PM
|
#1
|
Member
Join Date: Jun 2012
Posts: 33
|
Switch Panel
I am in need of help as to where to order a switch assembly that is at the entrance door to my 2003 Holiday Rambler Endeavour Motorhome. It is the one with four switches that include the battery disconnect, lights outside porch light and one other. Any help would be appreciated.
Thanks
Justdoc
__________________
2003 40' HOLIDAY RAMBLER
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-26-2014, 04:44 PM
|
#2
|
Senior Member
Vintage RV Owners Club
Join Date: Apr 2012
Location: Lyons, GA
Posts: 769
|
Hello
Why do you need to replace the whole panel? Did the whole thing break or melt? The switches are separate from the plate. If you need switches look close and you may see a name and part numbers. Most switches come in standard sizes for the holes in the plate. You can have a new plate made (local H.S. or collage electronics class) if you are happy with just filling a hole and it need not match 100% Or try your luck at the RV wreaking yards.
|
|
|
04-26-2014, 07:09 PM
|
#3
|
Member
Join Date: Jun 2012
Posts: 33
|
I need the whole assembly. 2 switches were broken by my grandchildren, and I tried taking it apart to get new switches but the plate broke in all four corners. Thanks for the reply.
Justdoc
__________________
2003 40' HOLIDAY RAMBLER
|
|
|
04-26-2014, 08:12 PM
|
#4
|
Senior Member
Join Date: Sep 2012
Posts: 1,177
|
i made one form a lower door kick plate at any bug hardware store cut out what i needed and added switches in place
i did it as a type thing but looks nice and my switches are bigger but can work for you just that same
could help save money and look nicer in the long run
|
|
|
04-26-2014, 08:20 PM
|
#5
|
Senior Member
Vintage RV Owners Club
Join Date: Apr 2012
Location: Lyons, GA
Posts: 769
|
Well if Monaco does not have it or even the RV wreaking yards you will have to have a close copy made. A photo might help here. Was it metal/plastic/wood? Rocker switches? Are you handy with tools? A good hobby shop will have thin metal sheets and decals to make labels. Digikey might have switches or a good auto shop.
|
|
|
04-26-2014, 08:30 PM
|
#6
|
Senior Member
Monaco Owners Club
Join Date: Apr 2010
Location: Saint Leonard,MD
Posts: 750
|
Good luck on finding an original panel. There were a few types available from some of the Monaco parts dealers like NorthWest RV but chances are slim. There is a company that made some new panels for Diplomat Don but were expensive. If you can glue together the old panel and buy new Carling switches for the broken switches that might be your best bet. Save the Labels from the old switches for the new ones. Digikey probably has many of the switches you need. I purchased some LED lighted SPDT ones recently from them to add some rope lights. There were some original switches with labels on ebay awhile back but if you can salvage the labels use the new LED versions.
__________________
2005 Safari Panther Diamond IV Cat C13
2013 Avalanche Toad
|
|
|
04-27-2014, 04:59 AM
|
#7
|
Senior Member
Monaco Owners Club
Join Date: Jan 2003
Location: Knoxville, TN, USA
Posts: 3,998
|
Quote:
Originally Posted by Justdoc
I am in need of help as to where to order a switch assembly that is at the entrance door to my 2003 Holiday Rambler Endeavour Motorhome. It is the one with four switches that include the battery disconnect, lights outside porch light and one other. Any help would be appreciated.
Thanks
Justdoc
|
Give these people a call and they most likely can supply you with new switches:
ROCKER SWITCHES by SIGMA | SPDT SPST DPST DPDT Momentary, Lighted, Waterproof & Miniature (Mini)
I have purchased switches from them on several occasions and talked to them on the phone. Easy to work with but I do believe they have a $25 dollar minimum order.
Bob
__________________
Bob and Pam
2022 Quantum JM31
2023 Colorado Z71
|
|
|
04-27-2014, 05:21 AM
|
#8
|
Senior Member
Monaco Owners Club Holiday Rambler Owners Club
Join Date: Dec 2006
Posts: 1,723
|
I found these on Amazon.com under JR Products - Electronics.
Amazon.com: JR Products: Electronics
__________________
Mike & Sharon and our Pup Frankie
2008 HR Endeavor 40PDQ
|
|
|
04-27-2014, 06:54 AM
|
#9
|
Senior Member
Monaco Owners Club Texas Boomers Club
Join Date: Jan 2009
Posts: 2,529
|
__________________
Hal & Ginny Miller '04 Beaver Santiam PRT40
'04 Saturn Vue - US Gear Brake - Blue Ox tow
3"girls" (2 Irish Setters - 1 Retriever) - RIP Annie & Emily (12/26/2017)
|
|
|
04-27-2014, 02:44 PM
|
#10
|
Member
Join Date: Jun 2012
Posts: 33
|
Thank you all for the info.
Justdoc
__________________
2003 40' HOLIDAY RAMBLER
|
|
|
04-28-2014, 05:02 AM
|
#12
|
Senior Member
Monaco Owners Club
Join Date: Jun 2012
Location: Merritt Island, FL
Posts: 1,742
|
If you have the pieces for the switch plate use Gorilla Glue. I've repaired many switch plate corners with it. It's amazing how well it holds them together.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|