Community Forums

kenwyatt · 06-23-2019, 11:08 AM

Trying to find info and parts for my tag axle. The diaphragm on the lift can is blown. Can anyone help. Can not read any info on the can

Topman · 06-23-2019, 12:53 PM

Common part. Any truck parts place will carry them. Easy to replace just measure diameter. They should be either 5" or 7" IIRC.

CountryB · 06-23-2019, 01:20 PM

The size it typically stamped on the clamp. Probably a "Type 24".

You can easily remove the clamp and take the diaphragm (rubber pancake) out and then take to NAPA store or truck part store.

kenwyatt · 06-23-2019, 04:57 PM

Thanks for all the help. Mine was a 8 in, picked up 2 at O’ Riley’s and changed them

Ivylog · 06-23-2019, 08:00 PM

Was it a #30 diaphragm for your Beaver, $10??? Did you change in place or did you remove entire chamber. The # will be on the diaphragm.

kenwyatt · 06-24-2019, 06:48 AM

#30, changed in place. Remove the clamp lift off the top and change. Took longer to gather the tools “ 9/16 deep well socket” then to do the job. Bought it at O’Reilly’s for $4.30 tax included. Changed them both for under $8.00!